> Hi Jim,
>
> There must have been sufficient horizontal detail for the AF to work.
> Even the EOS 1000FN will focus on a lot of things I thought would
> not have sufficient (vertical) detail. But it cannot compare with
> a cross-type sensor.
>
> There are lots of nice features in the EOS 10.
> How do you switch from single-frame to 3fps to 5fps?
> Does it need a lot of button-pushing?
>
> Cheers
> Julian Loke
It's true enough, the 10 would focus on the bare wall even in a dim
room, with all sensors :-)
I don't have to switch FPS, it just does 5 FPS in single shot focus, and
3.5 FPS in servo. Switching to servo requires a button press (bottom of
camera rear) and the movement of the command ring. (whatever it's called -
exposure shift ring?) If I turn it off in servo mode, it is that way when
turning back on, so you don't have to keep switching it. I generally leave
it in one shot focus mode, and switch to servo mode rarely.
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
