The incorrect ISO/ASA problem is the 2nd time it has happened in 10 months.
The first time I was lucky to catch the shutter speed being way too high
given the ambient lighting, checked the ISO on the LCD display and it showed
3200 when the film is a Fuji 200 Superia.
I manually set the ISO back to 200 and the rest of the session went just
fine, I paid specific attention to the ISO number flashed up on the LCD when
each new roll of film is loaded for the next 10 or so rolls, everything was
fine, so I stopped checking on a consistent basis.
I was doing some portrait shoot yesterday with the same EOS-3, and
ST-E2/550EX combo using one roll of Kodak Gold 200 (just to check lighting
effects) and was horrified when the proof prints came back WAY underexposed,
the negative also showed the extreme underexposure.
In this session I had set the camera to manual mode at F8 and 1/60 sec while
the flash was left on auto mode (i.e. E-TTL). As this is the set-up I have
used successfully many times in the past, I was shocked to see the
underexposed result.
When I checked the camera, I found that the ISO setting, which keeps the
setting of the last roll of film, was indicating 3200!! At least that
explained the underexposure result, in fact 4 stops of underexposure!!
Since the flash was in auto E-TTL mode, it happily fired just enough light
for a 3200 ASA film, and the ST-E2 happily provided the green confirmation
light each time, the worst part is that there was no way for me to realize
something has gone drastically wrong.......
I put another roll of film in the camera today, and the correct ISO number
flashed up as expected. The test shoot after that went well, the proof
prints came back perfect.
I guess I will be checking the ISO setting on the LCD display each time a
new roll of film is loaded for the next while.
Anybody else have experienced this problem?
BTW, I used a 12 frame roll Kodak film today, the EOS-3 had no idea about
the frame quantity and displayed 36 frames when the roll is loaded (I have
the CF to count down on the number of frames remaining), I guess there is
just no valid DX coding for a 12 frame roll.
Regards,
Ken
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************