Ray Amos wrote:
>
> "M.J.Shupe" wrote:
>
> > What is the mis-aligned focusing screen problem? In my eos 3, my grid
> > screen (installed by me) will not line up with the central focusing
> > point and it drives me nuts. Is this a mis-aligned focusing screen? Is
> > it fixable?
>
> Mike, Actually this is easy to fix. The problem is there is a
> little extra play when the focusing screen drops into it's nest. During
> shipment the camera gets thrown around and banged up and the focusing
> screen occasionally shifts around. Sometimes you can hit the side of
> the camera body with the palm of your hand and it will shift the
> focusing screen to the correct alignment. Sometimes you have to release
> the door and move it around with the end of a paper clip or something
> small.
> Ray Amos
Thanks for the description, Ray. I have already tried all this, and I
was wondering if it had something to do with the focus screen carrier
being misaligned and a way to adjust it. Too bad. My screen is aligned
off to the left or more off to the left depending on where I put the
slight play, but no matter how many times I reposition it, it's never in
the center! Aaarrgh.
Oh well.
Thanks again,
Mike
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************