> [EMAIL PROTECTED] wrote:
> Ok, not quite, but...since it seems like the Elan 7 won't allow the wireless
> ETTL master flash (in this case, an EF 500) ...

Hi Alex,

I answered this very question from you on the Elan 7E list, but you might
have missed it the first time around:
 http://yahoogroups.com/message/elan7e/2601

Cheers
Julian Loke
-- 
>> [EMAIL PROTECTED] wrote: ...
>> Yeah, you mean the instructions on pages 21 and 22 of the manual?  I
>> followed those steps (on two separate occasions), and the panel
>> indicated that the master flash was off, but it fired anyway.
>> According to someone on the EOS list, however:
>> "I think you can only do that (no flash on master, fire the slave) on
>> EOS 3 or greater. I could not do that on 550ex either."
>> So maybe it's not possible to have a disabled master flash at all on
>> the Elan 7.  I can't imagine why not--this hardly seems like an
>> advanced feature, but whatever...
> 
> I think there is a very troubling flaw of logic in this thread. Perhaps it
> is because E-TTL, and wireless E-TTL in particular, is confusing.
> 
> The 550EX (or EF 500 Super for that matter) control signals are emitted by
> the MAIN FLASH HEAD. The signals are usually emitted just before the
> exposure, so it can appear that there is only one flash burst, when in fact
> there may be several.
> 
> If you set your flash to NO FLASH on MASTER, but to enable SLAVE flashes,
> the main flash head is STILL used to communicate with the slaves. The only
> difference is that during exposure, the master flash will not fire.
> 
> 
> And yes, it is certainly possible to have the Elan 7E use an attached flash
> only as an AF assist device without firing the main flash head. The answer
> is to use CF7=3 on the camera, instead of any setting on your flash.
> 
> Cheers
> Julian Loke

*
****
*******
***********************************************************
*  For list instructions, including unsubscribe, see:
*    http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************

Reply via email to