----- Original Message ----- From: "Alex Z" <[EMAIL PROTECTED]> To: "EOS mailing list" <[EMAIL PROTECTED]> Sent: Monday, December 22, 2003 10:43 AM Subject: EOS Pushing Sensia 100
> Now, I had Sensia 100 as my main film for the trip, however all the > time it was heavily overcast and sometimes slightly raining, so to get > even barely acceptable hend-holding shutter speeds i had to push the > film to ISO 320. > The questions is: how shoudl I have film processed ? (to instruct the > processor to compensate by 2 stops ? I guess they can only do > push-processing by whole number of stops (1 or 2, nothing in-between > and no more then 2). > Later I indend to scan the films. Sounds like a case for a clip test, (you'll lose one or two exposures), and decide with your processor on what's best. If they use a dip and dunk processor, they may be able to give you your 320 ISO with little problem. If your weather really was as bad as you indicate, a 2 stop push will probably be best, as it will raise the mid tones and give your slides a better look. (But, any strong highlights will stand a higher chance of being blown out.) Malcolm Milton Keynes, UK www.megalith.freeserve.co.uk/oddimage.htm http://myweb.tiscali.co.uk/ms1938/ * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
