----- Original Message ----- 
From: "R.Sriram" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 25, 2004 1:30 AM
Subject: Re: EOS Question about primes


snip
> The 50/1.4 is much better built than the 50/1.8-II, with a steel lens
> mount and distance scales as well. However my sample of the 50/1.4 had
> very bad barrel distortion which became worse when focused close, as a
> result I couldn't shoot *anything* which had straight lines near the
> edges of the frame. Others have reported better samples.

I'm not disputing your findings regarding distortion, but I don't understand the
mechanism, and its variation from sample to sample.
My understanding is that lens resolution is dependent on (very) accurate
assembly of finely made parts, and that barrel (& pincushion) distortion is a
design feature "left in" by the lens designer (so as to reduce other
aberrations), and is affected by the relative position of the elements to the
lens' optical centre and aperture mechanism.  The EF 50 f1.4 is a relatively
simple lens (compared to zooms, at least), so I would have expected that
assembly sufficient to achieve decent resolution, would have automatically
delivered the same barrel distortion from sample to sample.
So far in my usage, I haven't noticed any distortion with my f1.4 nor f1.8, but
I haven't gone out of my way to set up the tests to measure the effects.  When
I'm focusing close, I automatically reach for my 100 f2.8 macro USM which may
have a bearing on what I see!

Malcolm
Milton Keynes, UK
www.megalith.freeserve.co.uk/oddimage.htm
http://myweb.tiscali.co.uk/ms1938/

*
****
*******
***********************************************************
*  For list instructions, including unsubscribe, see:
*    http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************

Reply via email to