----- Original Message ----- From: "Howard Grill" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, March 21, 2004 10:40 PM Subject: EOS Frozen with indecision > > I have decided to make the move to digital and am waiting for the 1D MkII > but it appears that it may not be until early summer that one will be > generally available if not already on a waiting list. Anyway, I was also > considering getting a 10D to use until the MkII and then using this as a > back up and as a lighter walk around the street type camera. However, I am > frozen with indecision about getting it based on all the hoopla about > focusing problems with the camera that are either there out of the box or > develop over time...just curious about you folks opinion about the current > status of this issue. > Also up to what size prints do you feel are still 'really good' can be > generated from the 10D files? > Thanks. > Howard
I've had a 10D for a year, and I use an Epson 1270, and Pictorico White Glossy Film* for my best prints. Excellent A4s are a doddle, and I also have done a number of A3s to a very high standard. (*Similar to Cibachrome in finish.) With regard to the focus issue, it's difficult to say. Since getting my 10D I've used mainly my prime lenses and I expect the majority of shots have been taken at around f4-f8, so the accuracy of really critical focus hasn't been an issue. However two weeks ago I took my camera to Lehmann's (in Stoke-on-Trent, UK) and they carried out a free service under warranty. This included focus check & calibrate, sensor clean, and upgrade of firmware to 2.0.1. I've done a few tests at full aperture since then, and the test results give me confidence that full aperture is now fully usable - even with my EF 50 f1.4. (The purple fringing noted in earlier full aperture shots is now definitely in an out-of-focus area.) If you do go digital, you'll no doubt wonder about whether to use RAW, or whether to save space & time with jpeg only. Discussions seem to get "religious " very quickly, and I'd advise giving both a try, making some prints and then making your decision. I can show pairs of prints from both sources, and I'd be amazed if others could decide whether I'd used RAW or jpeg. Malcolm Milton Keynes, UK www.megalith.freeserve.co.uk/oddimage.htm http://myweb.tiscali.co.uk/ms1938/ * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
