> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Tom Pfeiffer
> Sent: Tuesday, June 22, 2004 11:40 AM
> To: [EMAIL PROTECTED]
> Subject: RE: EOS Problems are not limited to Sigma, Canon has theirs
> too!
>
>
> How many of us have the 70-200 f/2.8L IS? Better check those mount screws!
>
> http://forums.dpreview.com/forums/read.asp?forum=1032&message=9260184
>
>
>
>

Hi Tom,

This guy is a whiner and trying to blame his own poor maintenance for this
failure.  Nothing could be farther form the truth!  By his own description
the screws did not part from the mount but were simply loose and unscrewed!
How is this the mount's or manufacture's fault?  If your brakes were worn
out and you hit another car is this the car maker's fault?  Do the math!

People are spoiled with reliable modern electronic based camera bodies.
This is something that almost nobody talks about, how often people clean and
check their equipment.  One of the things that I learned long ago (before
reliable analog electronics came in SLRs), is that stuff happens to
mechanical gear that's used in the field a lot and the BEST way to control
repair costs and reduce/prevent major failures during a shoot is to check
your equipment after EVERY shoot and get it fixed now, not later.

Back in the olden days (30+ years ago), when I primarily shot products with
cut film cameras (though I did have to shoot with the agency Nikon F's once
in a while for cheap clients or small print images), I was taught to check
every externally accessible screw with a screwdriver after every major shoot
in the studio, this was SOP.

I've continued this practice along with a wipe down with a gun cloth or
micorfibre cloth and visual inspection of all straps and external strap lugs
and mounts.  I have NEVER had a body lens mount or lens mount fail in the
field, there is no excuse for this except for poor work habits.  I did have
had a strap swivel fail internally on my EF 300 2.8L with an EOS 1N and
booster mounted, that lens and body is now corroding in 600' of Pacific
ocean.  This was caused by a failure of the swivel internally to the lens
body, the strap was still connected to the swivel as I tried to keep the
lens in the boat!  Sigh.


Cheers/Chip




*
****
*******
***********************************************************
*  For list instructions, including unsubscribe, see:
*    http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************

Reply via email to