----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Cool. We're about to annual my plane, and if we have some extra time maybe we'll make one up and try it out. Thanks, Kevin! Greg At 03:00 PM 1/7/2004 -0500, Kevin Gassert wrote: >I just looked back in the Coupe Capers online. It is in the September >issues. It has a good picture so you can see the dimensions. > >Kevin > > > > >-----Original Message----- >From: Greg Bullough [mailto:[EMAIL PROTECTED] >Sent: Wednesday, January 07, 2004 2:28 PM >To: Kevin Gassert; [EMAIL PROTECTED]; [email protected] >Subject: RE: [COUPERS-FLYIN] Air/Oil Separator > >At 02:18 PM 1/7/2004 -0500, Kevin Gassert wrote: > >I saw that elbow for sale somewhere. Wasn't it in Coupe Capers? It was > >$150. Seems a bit high since it is about $10 in parts but it does make > >me a little nervous making it myself. > >I believe the article that I read about it was from the J3 type >club newsletter, and was reprinted in 'Vintage' the journal >of the EAA Vintage Aircraft Association within the last 3 >years or so. It included specs for making it. > >I wouldn't be nervous...the tube goes inside the elbow and is >brazed in place, just like the factory part. It's unlikely to fall >off in there. > >Greg ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
