----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Good point Ed !! ----- Original Message ----- From: "Ed Burkhead" <[EMAIL PROTECTED]> To: "Coupe-List" <[email protected]> Sent: Wednesday, September 01, 2004 4:48 AM Subject: RE: [COUPERS-FLYIN] C85 to 0200 > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > > People change to the O-200 may profit most by making sure they have the > oil breather tube extension. The O-200 seems to splash the oil around > the inside of the case more than the slower turning C-75 and C-85. > > http://edburkhead.com/Ercoupe/oil_blow_out.htm > > Ed Burkhead > http://edburkhead.com/ > ed -at- edburkheadQQQ.com (change -at- and remove the QQQ) > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Tuesday, August 31, 2004 10:49 PM > To: "Dan Hall"; "earl johnson"; [email protected] > Subject: Re: [COUPERS-FLYIN] C85 to 0200 > > ----[Please read http://ercoupers.com/disclaimer.htm before following > any advice in this forum.]---- > > > Convert to the optional nosebowl...I think it is called the Kenney > Nosebowl. Correct me if i am wrong. I have the 0-200 with that nosebowl > and no oil cooler and never run too hot in the summer time. Also, put an > oil/air separator on while you have it apart. It will keep your belly > clean. > Scott > N94428 > ======================================================================== > ====== > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers/ > > > > > > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers/ > > > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
