----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Yep that's what I'm finding out. I have forward
John's name/number to Don Abbott. Thanks Greg and everyone else that
responded ( so quickly too ) off list also.
--mitch
----- Original Message -----
Sent: Wednesday, March 12, 2003 8:48
PM
Subject: Re: [COUPERS-FLYIN] Fw: Coupe
gas tank rebuild
----[Please read http://ercoupers.com/disclaimer.htm
before following any advice in this forum.]---- It's John Wright Jr., by
popular acclaim.
Greg
At 07:04 PM 3/12/03 -0500, Mitch Hines
wrote:
----[Please read
http://ercoupers.com/disclaimer.htm before following any advice in this
forum.]----
Fellow 'Couper Don Abbott is looking for the best place to get his
"G" model tanks repaired. Can anyone point him to a good
resource. I'll make sure that the post is forwarded to him.
Univair told him they thought it was someone in the Midwest, but didn't have
a name.
Regards,
--mitch
Mitch
Hines
Alon A-2 Aircoupe
N6369V
http://www.hinessite.com
Flight by machines heavier than air is
unpractical
and insignificant, if not utterly
impossible.
- Simon Newcomb, 1902
----- Original Message -----
From: Don Abbott
To: [EMAIL PROTECTED]
Sent: Wednesday, March 12, 2003 5:19 PM
Subject: Coupe
gas tank rebuild
Member 8024, Don Abbott
N94411, Fort Myers, FL
I need to
have the wing tanks in my G model rebuilt. A previous owner sprayed
epoxy inside the tanks and it is flaking. Also there is a minor leak
along the front of the left tank. Univair said they thought someone in
the midwest, Illinois or Iowa, does the work but they could not give me a
name.
Any help would be greatly
appreciated. I would like to be able to take the coupe to Sun 'n
Fun.
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm Search the archives
on http://escribe.com/aviation/coupers/
==========================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/
|
