----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----


Stan
The GEN drive ratio is 1:2.035 conterclockwise as
viewed from rear of engine. Keep at it you find the
problem and say DARN $$$$ [EMAIL PROTECTED]
Joe W
--- Stan <[EMAIL PROTECTED]> wrote:
> ----[Please read http://ercoupers.com/disclaimer.htm
> before following any advice in this forum.]----
> 
> 
> 
> Ok, I *know* Ive got a demonic generator now.  I
> completely disconnected all the leads on the
> generator (at the engine) and checked it while the
> engine was running about 1500 RPM.  Grounded the
> field and checked the armature voltage.  Same as
> last time when I checked it at the voltage
> regulator- about .03 volts.  When I ungrounded the
> field the voltage went up just slightly to 0.5
> volts.  Just to be sure I used a jumper set and
> grounded the frame of the aircraft to the case of
> the generator and it still didnt read anything
> different.  
> 
>  
> 
> So I checked and marked the direction of rotation,
> pulled the bugger off (which requires pulling the
> left mag) and brought it in to a local auto parts
> store to get checked.  The fellow put it on his
> machine and spun it the correct way and as soon as
> he grounded the field the generator put out a little
> over 14V as slick as can be.  
> 
>  
> 
> What in the **((&&&^%% is going on ???????   The
> same thing happened last time I pulled the generator
> off- it wasnt outputting while on the plane but was
> when I took it in to *two* separate shops they both
> said it was working fine!!!
> 
>  
> 
> The only thing I can possibly think of is that the
> brushes may be floating.  I know Ive heard of this
> happening with electric RC planes when an engine is
> run too fast.  The fellow at the store said that he
> thought he was spinning the generator at about 1500
> RPM but in the plane it appears by eye that the gear
> ratio has got to be about 4 or 5 to one which would
> put it up over 6000 RPM and maybe at this higher RPM
> the brushes cant handle it?  Anybody know the exact
> gear ratio?
> 
>  
> 
> What else could it be?????  Ive got to get this
> sucker figured out, its driving me crazy J
> 
>  
> 
> Thanks again folks.
> 
>  
> 
> Stan  
> 
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Tax Center - File online, calculators, forms,
> and more
>
==========================================================================
====
> To leave this forum go to:
> http://ercoupers.com/lists.htm
> Search the archives on
> http://escribe.com/aviation/coupers/
> 
> 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
==========================================================================
====
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/


<<attachment: winmail.dat>>

Reply via email to