----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
By the
way, Army P-38 pilots of WW II did NOT go to multi-engine school either.
They learned to fly a twin engine airplane, which had counter-rotating props
that rotated the wrong way, so that it had two critical engines rather than just
one, by themselves.
I had
a client a few years ago who flew P-38s in the War. He said many squadrons
had one ship from which they would remove the radios and other stuff behind the
pilot, and install a simple little seat. Then, one brave soul would climb
back there with a rookie pilot, and give him "dual" without any sort of control
over the airplane whatsoever.
Jerry
E.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 31, 2006 11:17 AM
To: Paul M. Anton; [email protected]
Subject: Re: [COUPERS-FLYIN] P-59 (now ME-262)Absolutely incredible! Unless the ship in your picture is one of the new 262s, it appears to be one of the very, very few dual-control, tandem-seat 262s made to transition piston engine fighter pilots to the new jet technology.We, on the other hand, just pointed our best fighter pilots toward the P-80 and said, "Here's the Dash-One...go for it!" No silly, effeminate dual instruction for us! That was how we lost Dick Bong, 40-kill Navy ace, brought back to the States in '44 because combat was to dangerous to risk him. Killed testing a P-80 cold-turkey with no transition dual.-----Original Message-----
From: "Paul M. Anton" <[EMAIL PROTECTED]>
Sent: May 31, 2006 9:36 AM
To: [email protected]
Subject: Re: [COUPERS-FLYIN] P-59 (now ME-262) These new ME-262 planes are being manufactured at Pain Field WA. (KPAE) here's the web site http://www.stormbirds.com/.These aircraft are such a near clone of the original that Messerschmitt has given them the next werks number in sequence to use on the newly constructed aircraft. They do have updated engines, instruments and avionics.
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
