----[Please read http://ercoupers.com/disclaimer.htm before following any 
advice in this forum.]----


Lindy's fuel management technique that he taught fighter pilots in the
Pacific was simple, but effective.  Still is today.

When you have a constant speed prop, and you want to run the engine at, say,
65% of power, choose the combination of rpm/manifold pressure that results
in the LEAST rpm.

It's rpm, not manifold pressure, that influences fuel consumption the most.

And, the old tale about always being "over square" is nonsense.

When I transistion a pilot new to higher performance airplanes, I tell him
to run the airplane as slow on rpm as permitted.

In my old Comanche, I would cruise at 2200 rpm, with 24" of mp, and burn 2
gallons per hour less than if I squared up the rpm.  Same amount of power -
same speed.

Jerry E.

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm

Reply via email to