----[Please read http://ercoupers.com/disclaimer.htm before following any 
advice in this forum.]----


The plane crashed into a building in New York.
 
Sure, General Aviation does not need this right now.

Sure, the Airlines are going to leverage this into their "Let's get GA out 
of "Commercial Airspace" and let's impose user fees" campaign.  

With all due respect for what is a sad tragedy for a brother pilot and his 
relatives, this has the potential to snowball into a far darker day for GA.

I hope I am wrong.

Eliacim Cortes
N87071

Quoting John Roach <[EMAIL PROTECTED]>:

> ----[Please read http://ercoupers.com/disclaimer.htm before following any
> advice in this forum.]----
> 
> 
> Alan,
> Unfortunately, you are probably right. While we don't have anywhere 
> enough information, it looks like another case of bad judgment by a 
> pilot. I don't know exactly where the incident occurred, but since the 
> reports said that no aircraft were reported missing by the FAA, it was 
> probably a VFR flight. There is an area on the SE corner of Manhattan 
> that would be legal below 1500' if you could maintain a 1000' ground 
> clearance. With a reported ceiling of 1800' ,  there is not much of a 
> margin for error. Any distraction such as a low cloud, a mechanical 
> problem, or a problem with an instrument could rapidly become a big 
> problem, especially for a low time pilot. Some days are better spent 
> just polishing the plane in the hangar.
> 
> John Roach
> N 2427H
> 
> [EMAIL PROTECTED] wrote:
> > I am thinking we can expect a bunch of new flight restrictions for 
> > private aircraft coming up now.
> 
> 
==============================================================================
> To leave this forum go to: http://ercoupers.com/lists.htm
> 




-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm

Reply via email to