----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Hi, Hartmut,
Your mirror looks good to me. Are you sure you cannot identify the supplier? Dennis and Wayne say the same thing. I Have absolutely no desire to see my own image in a mirror, and little desire to see my co-pilot's face (I think the feeling is mutual). I do want to see aft and below my elevator. I think I can do that with a mirror like yours mounted a little higher. My own "neck swivel" doesn't work as well as it did 50 years ago - maybe it is corroded?
Don
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [COUPERS-TECH] Rear View Mirror
Date: Sun, 15 Oct 2006 11:55:50 +0200
Guys .Here my rear view mirror installation.The plane came with that mirror, I have no idea where to get one like this.It is mounted so that I can see my co-pilots face without the need to turn my eyes away from the panel.The image shows the situation without a copilot. I can see through one rear window.I doubt that a panoramic mirror would be a good idea here. That mirror would show the inside of your cabin in panoramic view and you would see yourself, your copilot and the fact that there are rear windows behind you. Too small to see details.Even my mirror is pretty much useless for evaluations of what's behind the plane. I turn around for that purpose...Hartmut----- Original Message -----From: DONALD BOWENTo: COUPERS TECHSent: Sunday, October 15, 2006 11:15 AMSubject: [COUPERS-TECH] Rear View Mirror----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I recently posted a description of the rear view mirror I attached to my ALON canopy handle. Subsequent flights have shown this not to be such a great idea. The mirror is tiny and the vibration of the canopy causes blurring and distortion. I moved the mirror to the windshield centerpost Where Dennis Spiegel has one on his Ercoupe. I Velcyroed it to the upper rear surface of the compass mount. It works better there, but still too much vibration, which can be minimized by placing a fingertip on it to steady it when looking aft. I still can't recommend it. Dennis says his mirror is a plastic one (no compass problems) and is quite a bit larger than my 4" x 1 1/8" one). Wayne Wollard sent me a photo of his mirror of about that description. It is mounted on his ALON glareshield. I tried a hand mirror in that location, but I can't see below my horizontal tail from that angle. So, I'd welcome any input telling me where to purchase a small (but not tiny) plastic, panoramic mirror which I would affix to my centerpost between the compass and the OAT gauge. Gyro stabilization would be a nice feature! Don Bowen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
