Hi Gene, The parts manual and service manual do leave a lot to be desired as to this gauge.
If I recall correctly, 415-C Ercoupes had a left wing tank gauge that could use a flat cover. Univair shows both 415-48119 (at about $4) and 415-4813888 (at about $50) covers for aluminum tank gauges. Serial No. 4964 is a 415-E Ercoupe. That wing tank gauge requires a plastic cover with the center heat formed to create a "bubble". Suggest you call Univair (888-433-5433) and confirm with them which part number cover you need. Original finish (under the cover) was black krackle. There is no gasket...this assembly was originally sealed with 3M EC570 cement. Hope this helps, WRB -- On Jul 5, 2010, at 21:45, goofyguy77 wrote: > Hi All, I have a little something I'd like to address on my E..This is > the wing tank fuel gauge cover. The gauge works, but the gauge is > competely unreadable in flight.. > > Upon digging through all of my hardcopy parts manual and service > manual, I can't find anything giving parts number information or a > blow-up of the assembly. All that I have is that my parts manual > references a page in a "service memo and service manual" for serial > numbers 2623 through 3467 (mine is 4964) > Does anyone have a scan of the updated parts page that they would be > willing to share??? > or > Univair has a gauge cover (aluminum tank) 48119 on pg 3-12 of the 2009 > catalog listed ... Is this the plastic cover that I need to replace, > and is there anything else (gasket) that needs to be replaced to > reassemble correctly??? > > thanks in advance, > > ///Gene >
