Detlev Offenbach wrote:
On Samstag, 14. Februar 2009, Geert Vancompernolle wrote:
Hi,
When you switch from project A to project B in Eric4, the working
directory is not switched accordingly. I assumed the working directory
was stored with the project, but that's apparently not the case.
Is it possible to store the working directory as part of the project data?
You can save a project session, which would contain this info (next to many
more like the currently open project files, breakpoints, settings of the
run/debug/... dialogs, bookmarks, ...). If configured, such a file will be
read upon opening a project and will be saved upon closing a project. Please
see the project configuration page and the project menu.
Regards,
Detlev
I've checked almost all the tick boxes in the "Configure project
settings" screen (Settings | Preferences...), but even then the project
working directory is not saved. Also, when there were more files open
prior to closing the project, those files are not re-opened when
re-opening the project. Only the main file is re-opened.
Also, I've tried to explicitly save the session using Project | Session
| Save session. All with the same (negative) result.
Where are those settings you're referring to?
Running the following on WinXP:
--
Best rgds,
Geert
________________________________________________
*Use EcoCho <http://www.ecocho.com>: environmentally friendly search the
internet!*
_______________________________________________
Eric mailing list
[email protected]
http://www.riverbankcomputing.com/mailman/listinfo/eric
