no problem at all, I will add a note to update the make file. On Mon, Oct 17, 2011 at 8:01 PM, Tristan Sloughter <[email protected]> wrote: > Ah right, I had just ha to go though that on my other laptop and Jordan told > me to install those. Thanks. > > On Mon, Oct 17, 2011 at 7:51 PM, Eric Merritt <[email protected]> > wrote: >> >> Ah, you need the latest and greatest erlware_commons. get that from >> the repo. Hmm, I realize I am going to have to update the makefile to >> check for these things. You will need getopt as well. >> >> On Mon, Oct 17, 2011 at 7:44 PM, Tristan Sloughter >> <[email protected]> wrote: >> > I just got the lastest from erlware/sinan on my mac and now I get a >> > different error on 'make escript' after a successful make: >> > erl -pa /Users/tristan/Devel/sinan/_build/sinan/lib/sinan-2.0.0/ebin -s >> > sinan manual_start -s sinan main -extra -s /Users/tristan/Devel/sinan >> > escript >> > Erlang R14B03 (erts-5.8.4) [source] [64-bit] [smp:2:2] [rq:2] >> > [async-threads:0] [hipe] [kernel-poll:false] >> > Eshell V5.8.4 (abort with ^G) >> > 1> {"init terminating in do_boot",{undef,[{ec_talk,say,["build problem >> > ~p:~p:~p",[error,undef,[{ec_talk,say,["starting: >> > >> > ~p",depends]},{sinan,'-run_task/4-fun-0-',4},{lists,foldl,3},{sinan,do_task_full,3},{sinan,do_task,3},{sinan,do_build,2},{sinan,main,0},{init,start_it,1}]]]},{sinan,do_task_full,3},{sinan,do_task,3},{sinan,do_build,2},{sinan,main,0},{init,start_it,1},{init,start_em,1}]}} >> > Crash dump was written to: erl_crash.dump >> > init terminating in do_boot () >> > make: *** [escript] Error 1 >> > On Mon, Oct 17, 2011 at 7:37 PM, Eric Merritt <[email protected]> >> > wrote: >> >> >> >> Oh, no that should work. the problem is only if you are actually >> >> running sinan on sinan. Ok lets start working through the common >> >> things, are you sure you have the latest and greatest sinan from >> >> master? >> >> >> >> On Mon, Oct 17, 2011 at 7:32 PM, Tristan Sloughter >> >> <[email protected]> wrote: >> >> > So is it a problem if I have a sinan in my path you are saying? >> >> > Because >> >> > I >> >> > ran make and then make escript. make escript is the one that fails. >> >> > >> >> > On Mon, Oct 17, 2011 at 7:27 PM, Eric Merritt >> >> > <[email protected]> >> >> > wrote: >> >> >> >> >> >> Ah, thats the problem. because I can't do sandboxing in erlang sinan >> >> >> will step all over itself when you try to build it with itself. >> >> >> >> >> >> If you are building sinan use the makefile to do all the >> >> >> bootstrapping. It builds a minimal version of sinan with erlc then >> >> >> does all the further building and testing with sinan itself. >> >> >> >> >> >> 2011/10/17 Tristan Sloughter <[email protected]>: >> >> >> > Na, that is me trying to build sinan itself. >> >> >> > >> >> >> > On Mon, Oct 17, 2011 at 7:07 PM, Eric Merritt >> >> >> > <[email protected]> >> >> >> > wrote: >> >> >> >> >> >> >> >> When sinan itself blows up it defaults to putting out as much >> >> >> >> information as possible. This is opposed to a user or project >> >> >> >> issue >> >> >> >> where it tries to put something less verbose out. >> >> >> >> >> >> >> >> I just uploaded a new one, that works for both Jordan and Me. I >> >> >> >> suspect this is something strange going on in your local setup. >> >> >> >> Off >> >> >> >> the top of my head though, I am not quite sure what is wrong. >> >> >> >> >> >> >> >> What are you trying to build, not sinan right? >> >> >> >> >> >> >> >> On Mon, Oct 17, 2011 at 6:31 PM, Tristan Sloughter >> >> >> >> <[email protected]> wrote: >> >> >> >> > oh, and the end of the error: >> >> >> >> > {sin_task_build,build_source,6}, >> >> >> >> > {sin_task_build,do_build_source,7}, >> >> >> >> > >> >> >> >> > {sin_task_build,'-build_app/4-fun-0-',7}, >> >> >> >> > {lists,foldl,3}, >> >> >> >> > {sin_task_build,build_app,4}, >> >> >> >> > >> >> >> >> > {sin_task_build,'-build_apps/4-fun-0-',4}, >> >> >> >> > {lists,foldl,3}] >> >> >> >> > >> >> >> >> > 2011/10/17 Tristan Sloughter <[email protected]> >> >> >> >> >> >> >> >> >> >> The new escript you uploaded isn't working for me either so >> >> >> >> >> I'm >> >> >> >> >> trying >> >> >> >> >> to >> >> >> >> >> build sinan. >> >> >> >> >> When I run 'sinan escript' I get an error so large I can't >> >> >> >> >> even >> >> >> >> >> scroll >> >> >> >> >> back to see the beginning. So I redirected to a file and here >> >> >> >> >> is >> >> >> >> >> the >> >> >> >> >> beginning of the error: >> >> >> >> >> >> >> >> >> >> erl -pa >> >> >> >> >> /home/tristan/Devel/sinan/_build/sinan/lib/sinan-2.0.0/ebin >> >> >> >> >> -s >> >> >> >> >> sinan manual_star >> >> >> >> >> t -s sinan main -extra -s /home/tristan/Devel/sinan escript >> >> >> >> >> Eshell V5.8.4 (abort with ^G) >> >> >> >> >> 1> starting: depends >> >> >> >> >> 1> Using the following lib directories to resolve >> >> >> >> >> dependencies: >> >> >> >> >> 1> /home/tristan/Devel/sinan/_build/sinan/lib >> >> >> >> >> 1> /usr/local/Cellar/erlang/R14B03/lib/erlang/lib >> >> >> >> >> 1> /usr/local/lib/erlang/lib/ >> >> >> >> >> 1> /usr/local/agner/packages/ >> >> >> >> >> 1> /usr/local/lib/erlang/lib >> >> >> >> >> 1> /usr/local/agner/packages/ >> >> >> >> >> 1> starting: build >> >> >> >> >> 1> build problem error:undef:[{sin_compile_erl,build_file, >> >> >> >> >> [{sin_matcher, >> >> >> >> >> {sin_config, >> >> >> >> >> >> >> >> >> >> [{{start_dir,'*','*','*','*','*'}, >> >> >> >> >> "/home/tristan/Devel/sinan"}, >> >> >> >> >> >> >> >> >> >> {{project_vsn,'*','*','*','*','*'},"2.0.0"}, >> >> >> >> >> >> >> >> >> >> {{project_name,'*','*','*','*','*'},sinan}, >> >> >> >> >> >> >> >> >> >> {{ignore_dirs,'*','*','*','*','*'}, >> >> >> >> >> >> >> >> >> >> ["_",".","smoketests","features"]}, >> >> >> >> >> >> >> >> >> >> {{ignore_apps,'*','*','*','*','*'},[]}, >> >> >> >> >> >> >> >> >> >> {{escript,'*','*','*','*','*'}, >> >> >> >> >> [{include_apps, >> >> >> >> >> >> >> >> >> >> [erlware_commons,cucumberl,proper, >> >> >> >> >> getopt]}]}, >> >> >> >> >> >> >> >> >> >> {{dep_dirs,'*','*','*','*','*'}, >> >> >> >> >> ["/usr/local/lib/erlang/lib", >> >> >> >> >> >> >> >> >> >> "/usr/local/agner/packages/"]}, >> >> >> >> >> >> >> >> >> >> {{dep_constraints,'*','*','*','*','*'}, >> >> >> >> >> [{cucumberl,"0.0.4",gte}, >> >> >> >> >> >> >> >> >> >> {erlware_commons,"0.5.0",gte}, >> >> >> >> >> {getopt,"0.0.1",gte}]}, >> >> >> >> >> >> >> >> >> >> {{config_dir,'*','*','*','*','*'},"config"}, >> >> >> >> >> >> >> >> >> >> {{compile_args,'*','*','*','*','*'}, >> >> >> >> >> >> >> >> >> >> [debug_info,report_warnings]}, >> >> >> >> >> >> >> >> >> >> {{build_dir,'*','*','*','*','*'},"_build"}, >> >> >> >> >> >> >> >> >> >> {{additional_args,'*','*','*','*','*'},[]}]}, >> >> >> >> >> [{module, >> >> >> >> >> {module,sin_utils,erl, >> >> >> >> >> >> >> >> >> >> "/home/tristan/Devel/sinan/src/sin_utils.erl", >> >> >> >> >> {set,0,16,16,8,80,48, >> >> >> >> >> 2011/10/17 Eric Merritt <[email protected]> >> >> >> >> >>> >> >> >> >> >>> hey man. I am a big paryher. I paryh all the time. >> >> >> >> >>> >> >> >> >> >>> On Mon, Oct 17, 2011 at 12:43 PM, Tristan Sloughter >> >> >> >> >>> <[email protected]> wrote: >> >> >> >> >>> > Eric, are you doing paryhing now? :) >> >> >> >> >>> > >> >> >> >> >>> > On Mon, Oct 17, 2011 at 12:40 PM, Jordan Wilberding >> >> >> >> >>> > <[email protected]> >> >> >> >> >>> > wrote: >> >> >> >> >>> >> >> >> >> >> >>> >> Must have been some "paryh" ;) >> >> >> >> >>> >> >> >> >> >> >>> >> On Sat, Oct 15, 2011 at 5:25 PM, Eric Merritt >> >> >> >> >>> >> <[email protected]> >> >> >> >> >>> >> wrote: >> >> >> >> >>> >>> >> >> >> >> >>> >>> I, am at a weekend long bayvhekor paryh >> >> >> >> >>> >>> >> >> >> >> >>> >>> On Oct 15, 2011 4:47 PM, "Tristan Sloughter" >> >> >> >> >>> >>> <[email protected]> wrote: >> >> >> >> >>> >>>> >> >> >> >> >>> >>>> Any chance you'll be doing that sometime soon :). >> >> >> >> >>> >>>> I got my agner stuffed worked out and kerl working, the >> >> >> >> >>> >>>> last >> >> >> >> >>> >>>> piece >> >> >> >> >>> >>>> for >> >> >> >> >>> >>>> having an awesome Erlang deployment setup to DotCloud is >> >> >> >> >>> >>>> getting >> >> >> >> >>> >>>> this sinan >> >> >> >> >>> >>>> to work. >> >> >> >> >>> >>>> >> >> >> >> >>> >>>> 2011/10/15 Tristan Sloughter >> >> >> >> >>> >>>> <[email protected]> >> >> >> >> >>> >>>>> >> >> >> >> >>> >>>>> Great, thanks. >> >> >> >> >>> >>>>> >> >> >> >> >>> >>>>> 2011/10/15 Eric Merritt <[email protected]> >> >> >> >> >>> >>>>>> >> >> >> >> >>> >>>>>> That had to be github. I will try to upload anotjet >> >> >> >> >>> >>>>>> >> >> >> >> >>> >>>>>> On Oct 15, 2011 12:38 PM, "Tristan Sloughter" >> >> >> >> >>> >>>>>> <[email protected]> wrote: >> >> >> >> >>> >>>>>> > >> >> >> >> >>> >>>>>> > The download is not working for me >> >> >> >> >>> >>>>>> > from https://github.com/erlware/sinan/downloads >> >> >> >> >>> >>>>>> > >> >> >> >> >>> >>>>>> > It gives some weird error about xml. >> >> >> >> >>> >>>>>> > >> >> >> >> >>> >>>>>> > 2011/10/15 Eric Merritt <[email protected]> >> >> >> >> >>> >>>>>> >> >> >> >> >> >>> >>>>>> >> I put it at the erlware sinan project not mine >> >> >> >> >>> >>>>>> >> >> >> >> >> >>> >>>>>> >> >> >> >> >> >>> >>>>>> >> On Oct 15, 2011 12:01 PM, "Tristan Sloughter" >> >> >> >> >>> >>>>>> >> <[email protected]> wrote: >> >> >> >> >>> >>>>>> >> > >> >> >> >> >>> >>>>>> >> > Also, what happened to the sinan download on >> >> >> >> >>> >>>>>> >> > github? >> >> >> >> >>> >>>>>> >> > >> >> >> >> >>> >>>>>> >> > >> >> >> >> >>> >>>>>> >> > On Sat, Oct 15, 2011 at 10:01 AM, Tristan >> >> >> >> >>> >>>>>> >> > Sloughter >> >> >> >> >>> >>>>>> >> > <[email protected]> wrote: >> >> >> >> >>> >>>>>> >> >> >> >> >> >> >>> >>>>>> >> >> Running 'sinan build' on a project is giving me >> >> >> >> >>> >>>>>> >> >> the >> >> >> >> >>> >>>>>> >> >> error >> >> >> >> >>> >>>>>> >> >> below. >> >> >> >> >>> >>>>>> >> >> Any ideas? >> >> >> >> >>> >>>>>> >> >> >> >> >> >> >>> >>>>>> >> >> escript: exception error: undefined function >> >> >> >> >>> >>>>>> >> >> sin_fs_resolver:format_exception/1 >> >> >> >> >>> >>>>>> >> >> in function sinan:do_task_full/3 >> >> >> >> >>> >>>>>> >> >> in call from sinan:do_task/3 >> >> >> >> >>> >>>>>> >> >> in call from sinan:do_build/2 >> >> >> >> >>> >>>>>> >> >> in call from escript:run/2 >> >> >> >> >>> >>>>>> >> >> in call from escript:start/1 >> >> >> >> >>> >>>>>> >> >> in call from init:start_it/1 >> >> >> >> >>> >>>>>> >> >> in call from init:start_em/1 >> >> >> >> >>> >>>>>> >> >> >> >> >> >> >>> >>>>>> >> >> >> >> >> >> >>> >>>>>> >> >> On Thu, Oct 6, 2011 at 10:05 AM, Eric Merritt >> >> >> >> >>> >>>>>> >> >> <[email protected]> wrote: >> >> >> >> >>> >>>>>> >> >>> >> >> >> >> >>> >>>>>> >> >>> Ok. I just uploaded a version that does the >> >> >> >> >>> >>>>>> >> >>> printing >> >> >> >> >>> >>>>>> >> >>> I >> >> >> >> >>> >>>>>> >> >>> talked >> >> >> >> >>> >>>>>> >> >>> about. You can download it at your convenience. >> >> >> >> >>> >>>>>> >> >>> >> >> >> >> >>> >>>>>> >> >>> On 10/06/11 at 09:50am, Tristan Sloughter >> >> >> >> >>> >>>>>> >> >>> wrote: >> >> >> >> >>> >>>>>> >> >>> > Yup, I do have R14B03 through brew which is >> >> >> >> >>> >>>>>> >> >>> > then >> >> >> >> >>> >>>>>> >> >>> > under >> >> >> >> >>> >>>>>> >> >>> > /usr/local/Cellar and >> >> >> >> >>> >>>>>> >> >>> > linked to. >> >> >> >> >>> >>>>>> >> >>> > >> >> >> >> >>> >>>>>> >> >>> > On Thu, Oct 6, 2011 at 9:45 AM, Eric Merritt >> >> >> >> >>> >>>>>> >> >>> > <[email protected]> wrote: >> >> >> >> >>> >>>>>> >> >>> > >> >> >> >> >>> >>>>>> >> >>> > > Out of curiousty your /usr/local/lib/erlang >> >> >> >> >>> >>>>>> >> >>> > > wouldn't >> >> >> >> >>> >>>>>> >> >>> > > happen >> >> >> >> >>> >>>>>> >> >>> > > to be >> >> >> >> >>> >>>>>> >> >>> > > built up with symlinks would it? I just >> >> >> >> >>> >>>>>> >> >>> > > encountered >> >> >> >> >>> >>>>>> >> >>> > > your >> >> >> >> >>> >>>>>> >> >>> > > problem >> >> >> >> >>> >>>>>> >> >>> > > because i install R14B04 and I actually use >> >> >> >> >>> >>>>>> >> >>> > > stow >> >> >> >> >>> >>>>>> >> >>> > > to >> >> >> >> >>> >>>>>> >> >>> > > handle >> >> >> >> >>> >>>>>> >> >>> > > these kinds >> >> >> >> >>> >>>>>> >> >>> > > of installs. so while >> >> >> >> >>> >>>>>> >> >>> > > /usr/local/lib/erlang/lib >> >> >> >> >>> >>>>>> >> >>> > > looks >> >> >> >> >>> >>>>>> >> >>> > > like >> >> >> >> >>> >>>>>> >> >>> > > it has >> >> >> >> >>> >>>>>> >> >>> > > everything in it sinan was actually >> >> >> >> >>> >>>>>> >> >>> > > resolving >> >> >> >> >>> >>>>>> >> >>> > > from >> >> >> >> >>> >>>>>> >> >>> > > /var/stow/otp_R14B04 while cucumberl and >> >> >> >> >>> >>>>>> >> >>> > > proper >> >> >> >> >>> >>>>>> >> >>> > > where >> >> >> >> >>> >>>>>> >> >>> > > in >> >> >> >> >>> >>>>>> >> >>> > > /var/stow/otp_R14B03. Just because of the >> >> >> >> >>> >>>>>> >> >>> > > way >> >> >> >> >>> >>>>>> >> >>> > > sinan >> >> >> >> >>> >>>>>> >> >>> > > was >> >> >> >> >>> >>>>>> >> >>> > > searching. >> >> >> >> >>> >>>>>> >> >>> > > >> >> >> >> >>> >>>>>> >> >>> > > >> >> >> >> >>> >>>>>> >> >>> > > On 10/05/11 at 01:27pm, Tristan Sloughter >> >> >> >> >>> >>>>>> >> >>> > > wrote: >> >> >> >> >>> >>>>>> >> >>> > > > Ok, thanks. I'll poke around tonight. >> >> >> >> >>> >>>>>> >> >>> > > > >> >> >> >> >>> >>>>>> >> >>> > > > On Wed, Oct 5, 2011 at 1:26 PM, Eric >> >> >> >> >>> >>>>>> >> >>> > > > Merritt >> >> >> >> >>> >>>>>> >> >>> > > > <[email protected]> >> >> >> >> >>> >>>>>> >> >>> > > wrote: >> >> >> >> >>> >>>>>> >> >>> > > > >> >> >> >> >>> >>>>>> >> >>> > > > > Thats not sinan, Its escript. Sinan >> >> >> >> >>> >>>>>> >> >>> > > > > doesnt >> >> >> >> >>> >>>>>> >> >>> > > > > have >> >> >> >> >>> >>>>>> >> >>> > > > > any >> >> >> >> >>> >>>>>> >> >>> > > > > options about >> >> >> >> >>> >>>>>> >> >>> > > > > doing things differently unfortunately. >> >> >> >> >>> >>>>>> >> >>> > > > > You >> >> >> >> >>> >>>>>> >> >>> > > > > can't >> >> >> >> >>> >>>>>> >> >>> > > > > actually start a >> >> >> >> >>> >>>>>> >> >>> > > > > release in escript because escript is a >> >> >> >> >>> >>>>>> >> >>> > > > > release >> >> >> >> >>> >>>>>> >> >>> > > > > and >> >> >> >> >>> >>>>>> >> >>> > > > > its >> >> >> >> >>> >>>>>> >> >>> > > > > already >> >> >> >> >>> >>>>>> >> >>> > > > > started by the time you run your actual >> >> >> >> >>> >>>>>> >> >>> > > > > script. >> >> >> >> >>> >>>>>> >> >>> > > > > Right >> >> >> >> >>> >>>>>> >> >>> > > > > now escript is a >> >> >> >> >>> >>>>>> >> >>> > > > > bit hacky for that reason. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > The long term fix is to finish up >> >> >> >> >>> >>>>>> >> >>> > > > > jeringa >> >> >> >> >>> >>>>>> >> >>> > > > > or >> >> >> >> >>> >>>>>> >> >>> > > > > the >> >> >> >> >>> >>>>>> >> >>> > > > > OTP >> >> >> >> >>> >>>>>> >> >>> > > > > guys finish up >> >> >> >> >>> >>>>>> >> >>> > > > > stand alone erlang. In the short term >> >> >> >> >>> >>>>>> >> >>> > > > > you >> >> >> >> >>> >>>>>> >> >>> > > > > can >> >> >> >> >>> >>>>>> >> >>> > > > > use >> >> >> >> >>> >>>>>> >> >>> > > > > escript and start >> >> >> >> >>> >>>>>> >> >>> > > > > the release manually. It sucks but its >> >> >> >> >>> >>>>>> >> >>> > > > > the >> >> >> >> >>> >>>>>> >> >>> > > > > only >> >> >> >> >>> >>>>>> >> >>> > > > > option. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > On Wed, Oct 5, 2011 at 1:23 PM, Tristan >> >> >> >> >>> >>>>>> >> >>> > > > > Sloughter >> >> >> >> >>> >>>>>> >> >>> > > > > <[email protected]> wrote: >> >> >> >> >>> >>>>>> >> >>> > > > > > Cool. >> >> >> >> >>> >>>>>> >> >>> > > > > > And so the 'sinan escript' feature >> >> >> >> >>> >>>>>> >> >>> > > > > > relies >> >> >> >> >>> >>>>>> >> >>> > > > > > on >> >> >> >> >>> >>>>>> >> >>> > > > > > being >> >> >> >> >>> >>>>>> >> >>> > > > > > able to call a >> >> >> >> >>> >>>>>> >> >>> > > > > function: >> >> >> >> >>> >>>>>> >> >>> > > > > > project:main/1 >> >> >> >> >>> >>>>>> >> >>> > > > > > Correct? >> >> >> >> >>> >>>>>> >> >>> > > > > > It would be great if instead it could >> >> >> >> >>> >>>>>> >> >>> > > > > > just >> >> >> >> >>> >>>>>> >> >>> > > > > > start >> >> >> >> >>> >>>>>> >> >>> > > > > > the >> >> >> >> >>> >>>>>> >> >>> > > > > > target system :) >> >> >> >> >>> >>>>>> >> >>> > > > > > Tristan >> >> >> >> >>> >>>>>> >> >>> > > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > > On Wed, Oct 5, 2011 at 1:15 PM, Eric >> >> >> >> >>> >>>>>> >> >>> > > > > > Merritt >> >> >> >> >>> >>>>>> >> >>> > > > > > <[email protected] >> >> >> >> >>> >>>>>> >> >>> > > > >> >> >> >> >>> >>>>>> >> >>> > > > > wrote: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> Ok. thats really good to know. I >> >> >> >> >>> >>>>>> >> >>> > > > > >> think >> >> >> >> >>> >>>>>> >> >>> > > > > >> what >> >> >> >> >>> >>>>>> >> >>> > > > > >> is >> >> >> >> >>> >>>>>> >> >>> > > > > >> going >> >> >> >> >>> >>>>>> >> >>> > > > > >> on is that >> >> >> >> >>> >>>>>> >> >>> > > > > >> because things are being distributed >> >> >> >> >>> >>>>>> >> >>> > > > > >> as >> >> >> >> >>> >>>>>> >> >>> > > > > >> an >> >> >> >> >>> >>>>>> >> >>> > > > > >> escript >> >> >> >> >>> >>>>>> >> >>> > > > > >> code:lib_dir >> >> >> >> >>> >>>>>> >> >>> > > isn't >> >> >> >> >>> >>>>>> >> >>> > > > > >> actually returning the lib dir of >> >> >> >> >>> >>>>>> >> >>> > > > > >> erts. >> >> >> >> >>> >>>>>> >> >>> > > > > >> Its >> >> >> >> >>> >>>>>> >> >>> > > > > >> returning the lib dir of >> >> >> >> >>> >>>>>> >> >>> > > > > >> the escript which isn't what we want >> >> >> >> >>> >>>>>> >> >>> > > > > >> at >> >> >> >> >>> >>>>>> >> >>> > > > > >> all. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> I need to think about that a little >> >> >> >> >>> >>>>>> >> >>> > > > > >> bit. >> >> >> >> >>> >>>>>> >> >>> > > > > >> To >> >> >> >> >>> >>>>>> >> >>> > > > > >> get >> >> >> >> >>> >>>>>> >> >>> > > > > >> it >> >> >> >> >>> >>>>>> >> >>> > > > > >> fixed. On a side >> >> >> >> >>> >>>>>> >> >>> > > > > >> note, sinan now respects the >> >> >> >> >>> >>>>>> >> >>> > > > > >> ERL_LIBS >> >> >> >> >>> >>>>>> >> >>> > > > > >> env >> >> >> >> >>> >>>>>> >> >>> > > > > >> variable, >> >> >> >> >>> >>>>>> >> >>> > > > > >> and that >> >> >> >> >>> >>>>>> >> >>> > > dep_dirs >> >> >> >> >>> >>>>>> >> >>> > > > > >> thing you just saw. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> On Wed, Oct 5, 2011 at 1:12 PM, >> >> >> >> >>> >>>>>> >> >>> > > > > >> Tristan >> >> >> >> >>> >>>>>> >> >>> > > > > >> Sloughter >> >> >> >> >>> >>>>>> >> >>> > > > > >> <[email protected]> wrote: >> >> >> >> >>> >>>>>> >> >>> > > > > >> > Hah, that fixed it! >> >> >> >> >>> >>>>>> >> >>> > > > > >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> > 2011/10/5 Eric Merritt >> >> >> >> >>> >>>>>> >> >>> > > > > >> > <[email protected]> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> Thats good and its bad. Its good >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> in >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> that >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> version parser is >> >> >> >> >>> >>>>>> >> >>> > > not >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> screwed up. Its bad in that its >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> not >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> finding >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> proper as it should. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> Hmm, this may be a pathing issue. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> I >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> am >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> not >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> sure >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> they we can test >> >> >> >> >>> >>>>>> >> >>> > > > > that. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> add a piece to your config that >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> looks >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> as >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> follows >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> {dep_dirs, ["<path to where ever >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> proper >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> is>"]}. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> so if proper is in >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> usr/local/lib/erlang/lib >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> it >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> would look like >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> {dep_dirs, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> ["/usr/local/lib/erlang/lib"]}. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> Lets see what that results in. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> On Wed, Oct 5, 2011 at 1:01 PM, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> Tristan >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> Sloughter >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> <[email protected]> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> wrote: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > I got rid of the other proper >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > and >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > installed >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > proper 1.0 from >> >> >> >> >>> >>>>>> >> >>> > > master, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > same >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > thing: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > starting: depends >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > Unable to resolve compile time >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > dependencies, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > probably do to the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > following >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > constraints: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > application proper in the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > project >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > constraint on proper with >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > constraints >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [proper] >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > originating >> >> >> >> >>> >>>>>> >> >>> > > from >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > these >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > application(s) >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > ['__top_level__'] >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > build problem >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > sin_task_depends:211 >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [{failed, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {possible_culprit, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [proper, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {proper, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {set,1,16,16,8,80,48, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {[],[],[],[],[],[],[],[],[],[],[],[], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[],[]}, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {{[],[], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [proper], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[],[],[],[],[],[],[],[],[],[], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > []}}}, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {set,1,16,16,8,80,48, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {[],[],[],[],[],[],[],[],[],[],[],[], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[],[]}, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > {{[],[],[],[],[],[],[],[],[],[],[],[], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[], >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > >> >> >> >> >>> >>>>>> >> >>> > > ['__top_level__']}}}}]}}] >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > On Wed, Oct 5, 2011 at 12:16 >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > PM, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > Eric >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > Merritt >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > <[email protected]> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> > wrote: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> This is the new dep solver >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> stuff. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> I >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> am >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> actually happy you are >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> hitting >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> this error. its going to help >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> get >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> error >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> messaging right. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> So what its saying there is >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> that >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> there >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> is >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> a >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> dependency change >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> starting >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> at proper that is not being >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> satisfied. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> So >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> it >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> might be proper >> >> >> >> >>> >>>>>> >> >>> > > or >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> something that proper depends >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> on. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> (Its >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> hard >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> for the system to >> >> >> >> >>> >>>>>> >> >>> > > know >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> exactly in a back tracing >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> search >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> senario). >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Hmmm. I wonder if the 'alpha2' >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> is >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> problem. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> That could be a >> >> >> >> >>> >>>>>> >> >>> > > > > bug, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> I >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> may have to do some better >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> version >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> parsing. In >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> any case, Do >> >> >> >> >>> >>>>>> >> >>> > > me a >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> favor. There is a 1.0 version >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> of >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> proper >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> out. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Try installing >> >> >> >> >>> >>>>>> >> >>> > > that >> >> >> >> >>> >>>>>> >> >>> > > > > and >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> lets see what happens >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> https://github.com/manopapad/proper.git >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> You should probably use that >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> anyway, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> its >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> quite >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> a bit more >> >> >> >> >>> >>>>>> >> >>> > > advanced >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> then the version you have. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Eventually I want to break >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> these >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> things >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> out >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> into plugins so >> >> >> >> >>> >>>>>> >> >>> > > you if >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> you >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> dont need proper you dont have >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> to >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> have >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> it. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> oh and nuke your old proper. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Thanks for bearing with me in >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> this. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> You >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> are my >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> first non-me >> >> >> >> >>> >>>>>> >> >>> > > user >> >> >> >> >>> >>>>>> >> >>> > > > > of >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> this version of sinan. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> On Wed, Oct 5, 2011 at 12:08 >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> PM, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Tristan >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Sloughter >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> <[email protected]> >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> wrote: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > Note that the config file >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > must >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > be >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > named >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > sinan.config and not >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > sinan.cfg. >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > Once I got that fixed I get >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > what >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > looks >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > to be >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > complaining I >> >> >> >> >>> >>>>>> >> >>> > > don't >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > have >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > proper. But I do: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > /usr/local/lib/erlang/lib/proper-0.0.1alpha2/ >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > λ sinan build >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > starting: depends >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > Unable to resolve compile >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > time >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > dependencies, >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > probably do to >> >> >> >> >>> >>>>>> >> >>> > > the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > following >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > constraints: >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > application proper in the >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> > project >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >> >> >> >>> >>>>>> -- >> >> >> >> >>> >>>>>> You received this message because you are subscribed >> >> >> >> >>> >>>>>> to >> >> >> >> >>> >>>>>> the >> >> >> >> >>> >>>>>> Google >> >> >> >> >>> >>>>>> Groups "erlware-dev" group. >> >> >> >> >>> >>>>>> To post to this group, send email to >> >> >> >> >>> >>>>>> [email protected]. >> >> >> >> >>> >>>>>> To unsubscribe from this group, send email to >> >> >> >> >>> >>>>>> [email protected]. >> >> >> >> >>> >>>>>> For more options, visit this group at >> >> >> >> >>> >>>>>> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >>> >>>>> >> >> >> >> >>> >>>> >> >> >> >> >>> >>>> -- >> >> >> >> >>> >>>> You received this message because you are subscribed to >> >> >> >> >>> >>>> the >> >> >> >> >>> >>>> Google >> >> >> >> >>> >>>> Groups "erlware-dev" group. >> >> >> >> >>> >>>> To post to this group, send email to >> >> >> >> >>> >>>> [email protected]. >> >> >> >> >>> >>>> To unsubscribe from this group, send email to >> >> >> >> >>> >>>> [email protected]. >> >> >> >> >>> >>>> For more options, visit this group at >> >> >> >> >>> >>>> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >>> >>> >> >> >> >> >>> >>> -- >> >> >> >> >>> >>> You received this message because you are subscribed to >> >> >> >> >>> >>> the >> >> >> >> >>> >>> Google >> >> >> >> >>> >>> Groups >> >> >> >> >>> >>> "erlware-dev" group. >> >> >> >> >>> >>> To post to this group, send email to >> >> >> >> >>> >>> [email protected]. >> >> >> >> >>> >>> To unsubscribe from this group, send email to >> >> >> >> >>> >>> [email protected]. >> >> >> >> >>> >>> For more options, visit this group at >> >> >> >> >>> >>> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >>> >> >> >> >> >> >>> >> -- >> >> >> >> >>> >> You received this message because you are subscribed to >> >> >> >> >>> >> the >> >> >> >> >>> >> Google >> >> >> >> >>> >> Groups >> >> >> >> >>> >> "erlware-dev" group. >> >> >> >> >>> >> To post to this group, send email to >> >> >> >> >>> >> [email protected]. >> >> >> >> >>> >> To unsubscribe from this group, send email to >> >> >> >> >>> >> [email protected]. >> >> >> >> >>> >> For more options, visit this group at >> >> >> >> >>> >> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >>> > >> >> >> >> >>> > -- >> >> >> >> >>> > You received this message because you are subscribed to the >> >> >> >> >>> > Google >> >> >> >> >>> > Groups >> >> >> >> >>> > "erlware-dev" group. >> >> >> >> >>> > To post to this group, send email to >> >> >> >> >>> > [email protected]. >> >> >> >> >>> > To unsubscribe from this group, send email to >> >> >> >> >>> > [email protected]. >> >> >> >> >>> > For more options, visit this group at >> >> >> >> >>> > http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >>> > >> >> >> >> >>> >> >> >> >> >>> -- >> >> >> >> >>> You received this message because you are subscribed to the >> >> >> >> >>> Google >> >> >> >> >>> Groups >> >> >> >> >>> "erlware-dev" group. >> >> >> >> >>> To post to this group, send email to >> >> >> >> >>> [email protected]. >> >> >> >> >>> To unsubscribe from this group, send email to >> >> >> >> >>> [email protected]. >> >> >> >> >>> For more options, visit this group at >> >> >> >> >>> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >>> >> >> >> >> >> >> >> >> >> > >> >> >> >> > -- >> >> >> >> > You received this message because you are subscribed to the >> >> >> >> > Google >> >> >> >> > Groups >> >> >> >> > "erlware-dev" group. >> >> >> >> > To post to this group, send email to >> >> >> >> > [email protected]. >> >> >> >> > To unsubscribe from this group, send email to >> >> >> >> > [email protected]. >> >> >> >> > For more options, visit this group at >> >> >> >> > http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> > >> >> >> >> >> >> >> >> -- >> >> >> >> You received this message because you are subscribed to the >> >> >> >> Google >> >> >> >> Groups >> >> >> >> "erlware-dev" group. >> >> >> >> To post to this group, send email to >> >> >> >> [email protected]. >> >> >> >> To unsubscribe from this group, send email to >> >> >> >> [email protected]. >> >> >> >> For more options, visit this group at >> >> >> >> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >> >> >> > >> >> >> > -- >> >> >> > You received this message because you are subscribed to the Google >> >> >> > Groups >> >> >> > "erlware-dev" group. >> >> >> > To post to this group, send email to [email protected]. >> >> >> > To unsubscribe from this group, send email to >> >> >> > [email protected]. >> >> >> > For more options, visit this group at >> >> >> > http://groups.google.com/group/erlware-dev?hl=en. >> >> >> > >> >> >> >> >> >> -- >> >> >> You received this message because you are subscribed to the Google >> >> >> Groups >> >> >> "erlware-dev" group. >> >> >> To post to this group, send email to [email protected]. >> >> >> To unsubscribe from this group, send email to >> >> >> [email protected]. >> >> >> For more options, visit this group at >> >> >> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> >> >> > >> >> > -- >> >> > You received this message because you are subscribed to the Google >> >> > Groups >> >> > "erlware-dev" group. >> >> > To post to this group, send email to [email protected]. >> >> > To unsubscribe from this group, send email to >> >> > [email protected]. >> >> > For more options, visit this group at >> >> > http://groups.google.com/group/erlware-dev?hl=en. >> >> > >> >> >> >> -- >> >> You received this message because you are subscribed to the Google >> >> Groups >> >> "erlware-dev" group. >> >> To post to this group, send email to [email protected]. >> >> To unsubscribe from this group, send email to >> >> [email protected]. >> >> For more options, visit this group at >> >> http://groups.google.com/group/erlware-dev?hl=en. >> >> >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "erlware-dev" group. >> > To post to this group, send email to [email protected]. >> > To unsubscribe from this group, send email to >> > [email protected]. >> > For more options, visit this group at >> > http://groups.google.com/group/erlware-dev?hl=en. >> > >> >> -- >> You received this message because you are subscribed to the Google Groups >> "erlware-dev" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/erlware-dev?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "erlware-dev" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/erlware-dev?hl=en. >
-- You received this message because you are subscribed to the Google Groups "erlware-dev" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/erlware-dev?hl=en.
