Hallo. Try to have a look at https://github.com/sittner/ec-debianize/blob/master/debian/patches/40_xenomai_config.dpatch
This helped me to do my own manual installation on Xenomai 2.6 . Regards, b 2016-03-22 12:00 GMT+01:00 <etherlab-dev-requ...@etherlab.org>: > Send etherlab-dev mailing list submissions to > etherlab-dev@etherlab.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.etherlab.org/mailman/listinfo/etherlab-dev > or, via email, send a message with subject or body 'help' to > etherlab-dev-requ...@etherlab.org > > You can reach the person managing the list at > etherlab-dev-ow...@etherlab.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of etherlab-dev digest..." > > > Today's Topics: > > 1. Re: Xenomai 3 RTDM (Thomas Bitsky Jr) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 22 Mar 2016 06:01:48 +0000 > From: Thomas Bitsky Jr <t...@automateddesign.com> > To: etherlab-dev <etherlab-dev@etherlab.org> > Subject: Re: [etherlab-dev] Xenomai 3 RTDM > Message-ID: <610b6c30-3920-4052-ae64-3c6eb3cb9...@automateddesign.com> > Content-Type: text/plain; charset="utf-8" > > Following up on my message yesterday, I cracked open the Xenomai migration > guide, went ahead and started porting over RTDM to work with Xenomai 3. I > need to fix the labeling and it?s not very tested, but, on a 64-bit computer > running Xeomai-3 Cobalt, the EtherCAT master is able to register an RTDM > device and then runs normally. > > I?m not sure anyone on this list is interested in porting to Xenomai-3, so > instead of just pouring code into the mail list I made a git repository. If > anyone is interested in checking it out/providing feedback/pointing out > mistakes, you can check it out at: https://bitbucket.org/adc_tbj/etherlab-adc > > All changers are in master/rtdm.c > > Side note: none of the xenomai examples compile when I make the project. I?m > going to try and figure out why that is this week, but if anyone has any > experience with this, please point me in the right direction. > > Thanks! > Tom > > > > === > Hi, > > Has anyone ported the RTDM (rtdm.c) driver of the Ethercat master to Xenomai > 3? I?m trying to get running on Xenomai 3 and was going to start working on > that, but I thought I would check first and not duplicate work. > > Thanks! > Tom > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.etherlab.org/pipermail/etherlab-dev/attachments/20160322/0ded9f13/attachment-0001.html> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > etherlab-dev mailing list > etherlab-dev@etherlab.org > http://lists.etherlab.org/mailman/listinfo/etherlab-dev > > > ------------------------------ > > End of etherlab-dev Digest, Vol 82, Issue 1 > ******************************************* _______________________________________________ etherlab-dev mailing list etherlab-dev@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-dev