Hi,
I recently upgraded ethercat master to Gavin Patchset 20160804, adding to that, patch 0061. EoE seems to be working fine while the master is idle, with heavy SDO traffic in parallel. When the master is active our realtime application invokes ecrt_master_receive(master); and ecrt_master_send(master); from interrupt context, and NOT from ec_master_operation_thread() thread context. The problem comes up when the master is active. Just as I issue ifconfig eoe0a1 up I get a bunch of UNMATCHED DATAGRAMS in the kernel log, and the master is released. [ 73.324525] EtherCAT DEBUG 0: UNMATCHED datagram: [ 73.324528] EtherCAT DEBUG: 0D 83 01 00 10 09 08 80 00 00 68 5A 4A 84 9C 9B [ 73.324539] EtherCAT DEBUG: 84 11 01 00 [ 73.324544] EtherCAT DEBUG 0: UNMATCHED datagram: [ 73.324547] EtherCAT DEBUG: 04 84 01 00 90 09 08 80 00 00 B0 3D 4C 84 9C 9B [ 73.324557] EtherCAT DEBUG: 84 11 01 00 [ 73.324562] EtherCAT DEBUG 0: UNMATCHED datagram: [ 73.324565] EtherCAT DEBUG: 0C 85 00 00 00 00 10 80 00 00 00 00 70 FF FF FF [ 73.324575] EtherCAT DEBUG: 50 52 70 FF FF FF 00 00 31 00 03 00 [ 73.324584] EtherCAT DEBUG 0: UNMATCHED datagram: [ 73.324587] EtherCAT DEBUG: 07 86 01 00 30 01 02 00 00 00 08 00 01 00 [ 73.324838] EtherCAT 0: fsm->slaves_responding[fsm->dev_idx]=1 [ 73.324843] EtherCAT 0: 0 slave(s) responding on main device. [ 73.324846] EtherCAT 0: datagram->working_counter=0 <------------------------- In wireshark capture WC is 1 !!!! [ 73.324850] EtherCAT 0: datagram->state=4 [ 73.324853] EtherCAT 0: datagram->device_index=0 [ 73.324856] EtherCAT 0: datagram->device_origin=0 [ 73.324860] EtherCAT 0: datagram->index=134 [ 73.324863] EtherCAT 0: datagram->type=7 [ 73.324866] EtherCAT DEBUG 0: Rescanning the bus This happens due to a timeout. When the EoE thread invokes master->receive_cb(master->cb_data); which leads to invoke of ecrt_master_receive(master); it somehow messes up master->devices[EC_DEVICE_MAIN].cycles_poll which leads to a negative time delta in the calculation master->devices[EC_DEVICE_MAIN].cycles_poll - datagram->cycles_sent. Attempting to bypass that in the EoE thread, I commented out master->receive_cb(master->cb_data); and master->send_cb(master->cb_data); and once I invoke ifconfig eoe0a1 up I get an explosion of [ 123.529911] EtherCAT WARNING 0-main-0: Failed to receive mbox check datagram for eoe0a1. [ 123.529918] EtherCAT WARNING 0-main-0: Failed to receive mbox check datagram for eoe0a1. [ 123.529925] EtherCAT WARNING 0-main-0: Failed to receive mbox check datagram for eoe0a1. [ 123.529932] EtherCAT WARNING 0-main-0: Failed to receive mbox check datagram for eoe0a1. If I comment out only master->receive_cb(master->cb_data); I get no errors in dmesg, but then of course, EoE is not functional, and EoE thread starts gathering more and more CPU usage. I understand that an invoke of master->send_cb(master->cb_data); leads to ec_master_internal_send_cb --> ecrt_master_send_ext(master); which pulls datagrams from master->ext_datagram_queue and pushes them forward with ec_master_queue_datagram(), and then invokes ecrt_master_send(master); which will lead to a collision with ecrt_master_send() in the interrupt context. So instead of invoking master->send_cb(master->cb_data); i tried only to pass datagrams from master->ext_datagram_queue, but it caused a kernel panic. So, if I want EoE to work when the master is active, how should I pass datagrams from EoE thread to the master? Should I change the ethernet.c state machine? Thanks a lot, Nir.
_______________________________________________ etherlab-dev mailing list etherlab-dev@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-dev
