Hello,
I am not 100% sure but I will write down some conjectures what could cause the
problem. I think the critical part is this:
<Mailbox DataLinkLayer="true">
<CoE CompleteAccess="false" PdoUpload="true" SdoInfo="true"/>
<FoE/>
</Mailbox>
This is the description of PdoUpload:
Device has dynamic process data, i.e. PDO configuration
and PDO assignment is uploaded from the device and
SyncManager lengths are set according to the calculated
PDO length.
0: PDO description taken from ESI and SyncManager
length calculated based on the same
1: PDO description uploaded from the slave’s object
dictionary and SyncManager length calculated based on the
same
From what I understand there is a static and a dynamic way to manage process
data. The static way means the PDO informations resp. the SyncManager length
are stored in the EEPROM which is retrieved by the EtherCAT master during
initialization. The PDO informations are not mandatory but the SyncManager
length is.
Complex slaves, resp. slaves with attached microcontroller / FPGA etc. that
support mailbox communication, support a dynamic way where the PDO informations
are retrieved via the mailbox CoE protocol. The SyncManager length is then
calculated based on these informations. This of course has to be supported by
the microcontroller / FPGA or in your case the OMRON-NJ501 PLC or rather by
it's software / configuration. Unfortunately I can't tell you how to exactly do
this as we never used CoE. We also use the LAN9252 as complex slave with a FPGA
but with a custom configuration and only VoE mailbox protocoll.
One other guess: the ESI file tells me that CoE is not completely supported but some
features that use CoE are. Maybe this confuses the EtherCAT master? This would also
explain why "EtherCAT ERROR 0-0: Received mailbox protocol 0x08 as response."
occurs which means only FoE is set as supported mailbox protocol. Setting the bit in the
EEPROM might be of help here, but could lead to other errors.
Best regards,
Christoph
On 05/31/2017 10:09 AM, 권태영 wrote:
Hello.
I am testing the EtherLab with the MicroChip EVB-LAN9252-ADD-ON board.
The EVB-LAN9252-ADD-ON board is connected to ODROID-C1 and is used as an
EtherCAT slave as SOES(SPI communication).
Kernel version is using version 3.10.
I tested the ported SOES with OMRON-NJ501-1500 PLC and Sysmac Studio. (Attached
file: 1.png)
I have compiled EtherLab to do the same EtherCAT Master
operation.(etherlab-bundle-2.1)
I tried to control it with the ethercat command.
However, the following error message appears.
===================================================================
EtherCAT WARNING 0-0: Received mailbox protocol 0x08 as response.
EtherCAT ERROR 0-0: Failed to read number of assigned PDOs for SM2.
EtherCAT WARNING 0-0: Received mailbox protocol 0x08 as response.
EtherCAT ERROR 0-0: Failed to read number of assigned PDOs for SM3.
EtherCAT 0: Bus scanning completed in 90 ms.
EtherCAT 0: Using slave 0 as DC reference clock.
EtherCAT 0: Slave states on main device: PREOP.
EtherCAT ERROR 0-0: Received mailbox protocol 0x08 as response.
===================================================================
On the EVB-LAN9252-ADD-ON board, only the Run LED is blinking.(PEROP)
How can I tell if I can solve this problem?
Why does this error occur?
I am EtherCAT Newbi.... :(
The attached log.txt is all the commands and logs I have run.
The attached kty.xml file is the ESI file currently being used by the EtherCAT
Slave.
The attached 2.jpg is the current status of my board.
Regards
Kwon
_______________________________________________
etherlab-dev mailing list
[email protected]<mailto:[email protected]>
http://lists.etherlab.org/mailman/listinfo/etherlab-dev
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr.
Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Bernd Rech (kommissarisch), Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
_______________________________________________
etherlab-dev mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-dev
