Hi Florian， Thanks for your reply. I have ported a RTL8168 driver for EtherLab on kernel-2.6.23.Now it can run. I want to use EtherLab on standard linux kernel with . Because EtherLab_RTW need RTAI,so I just use EtherCAT master. Therefore I think that I need implement a configuration tool by myself on statndard linux kernel. I hope the tool can simply import slave's xml file and configure EtherCAT network.
Best regards, Li.peng -----邮件原件----- 发件人: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 代表 Florian Pose 发送时间: 2008年10月17日 22:07 收件人: [email protected] 主题: Re: [etherlab-users] RTL8168 Hi, On Fri, Oct 17, 2008 at 10:54:53AM +0800, li.peng wrote: > 1。Could etherlab support RTL8168？ sure, it should be possible to write an EtherCAT-capable Ethernet driver for any hardware. > 2。Could etherlab communicate with CIFX 50-RE of hilscher？ I personally tested several Hilscher slaves successfully with a Hilscher developer on the last EtherCAT Plugfest. Apart from that, it should be possible to use *any* slave with the IgH EtherCAT master. If not, please let me know. Do you just want to use the EtherCAT master, or other EtherLab components, too? -- Best regards, Florian Pose http://etherlab.org _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
