Hello, > On Mon, Mar 23, 2009 at 04:23:08PM +0100, Marco Götze wrote: > > We've been experimenting with the latest EtherLab release (1.2-rc5) > > in conjunction with MATLAB 2007B. Aiming to trace issues with a > > test application of our own, we've had a look at the included > > example and observed the same: the code generated seems to > > correctly handle data from input terminals but does not effectively > > output anything. We verified this by looking at the datagrams on > > the bus using Wireshark. > I recently noticed that problem. Obviously something was changed in > 2007b, the update code is only generated if there is at least a dummy > mdlUpdate() function present in the s-Function. I fixed that for rc5. > Are you sure you're using the latest version? Did you invoke > 'setup_etherlab' after installation?
Yes, but you guessed right -- when installing EtherLab, doing so via the stand-alone download failed with some error, which made me revert to the latest bundled download. What I failed to realize then was that the bundle included rc4 rather than rc5. Now, after upgrading the bundled EtherLab and reinstalling it, things work as expected. :-) Thanks-- Marco -- Dipl.-Inf. Marco Götze, System Design, +49 (3677) 6955-42 Institut für Mikroelektronik- und Mechatronik-Systeme (IMMS) gGmbH Ehrenbergstr. 27 · D-98693 Ilmenau · <http://www.imms.de/>
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
