Beat Gerber <beat.ger...@...> writes:
>
>
> Richard Hacker <h...@...> writes:
>
> >
> > Hi,
> >
> > It seems as though you do not have any real time application running.
> > etherlab_buddy opens one port starting from 2345 for every running real
> > time
> > application. rt_appcore is only the framework to allow these applications
> > to
> > run in real time.
> >
> > Richard
>
> Hi Richard,
>
> OK .. this was not clear to me. I thought as I can access the modules directly
> over TCP .. and if I need to also put a realtime module in between.
> So now I have to create a realtime gateway.
> I'll try to install ethercos with no success is there a newer Version around?
> ScicosLab-4.4b7 is installed (Fedora 13)
>
> ethercos-0.0.2-rc15]$ make
> echo "execute builder.sce in scilab"
> execute builder.sce in scilab
> scilab -nw -nb -f builder.sce;
>
>
>
> Scilab Version not supported
>
> warning: stack problem..., cleared
>
> -->
>
> Should this work? Or is there a known problem?
>
> Beat
>
>
I see ... I only have to read the right documentation ..
******
The requirements for installing EtherCos from source code are the following:
a - Scilab.
The new version of EtherCos only runs with Scilab 4.1.2 and
Scilab_GTK-4.1.2 and Scicoslab-4.3.
Your Scilab can be both a stable version (source, binary file).
Get it from www.scilab.org
b - Operating System
EtherCos has to be executed under Linux (until now only X86 is supported).
A running Kernel with HRT-Timer activated and the Preempt-RT patch
included is neccessary.
******
I would like to help .. if I can .. to get EtherCos working with ScicosLab-4.4b7
on Fedora 13 x86_64
Beat
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
