Hello, We use ecrt_master_get_slave as part of the poll cycle to fetch the slaves' status.
Regards, Ronaldo From: [email protected] [mailto:[email protected]] On Behalf Of Ian Norton Sent: 18 May 2012 08:47 To: [email protected] Subject: [etherlab-users] bus status recognition Hi, I'm running etherlab master in a regular Centos 6 kernel. The system functions fine, but it appears still to be fine if the network cable is unplugged! The normal command line commands still show all slaves happily working and in OP mode etc, and my user code still receives the coorect number of responding slaves form ecrt_master_state. Does anyone know how to detect an unplugged/broken network cable during operation? regards Ian R.K. Norton System Support Engineer Aircraft Engineering Cranfield Aerospace Ltd Cranfield Bedford MK43 0AL UK Tel - +44 (0) 1234 754926 Fax - +44 (0) 1234 752375 'All technology information within this Email has been Exported from the United Kingdom under Open General Export Licence (Technology for Military Goods) - BIS Reference: GBOGE2008/00462' ************************************************************ DISCLAIMER: This email and any attachments are confidential to the intended recipient and may also be privileged. For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. If you are not the intended recipient please delete it from your system and notify the sender immediately by telephoning +44(0) 1234 754978 or by immediate reply via e-mail to the Sender. Should the content of this Email, including any attachments, require an Export Licence, this shall have been registered in compliance with export controls laid down by the UK Export Control Organisation, which forms part of the UK Department for Business, Innovation and Skills (BIS). Emails and other electronic communication with Cranfield Aerospace may be monitored. Thank you. Cranfield Aerospace Limited Registered in England No. 2415720 Registered Office: Cranfield University, Cranfield, Beds, MK43 0AL Updated 14-July-2010 Disclaimer added by CodeTwo Exchange Rules www.codetwo.com<http://www.codetwo.com> -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
