Hallo Lee,
Am 17.09.2012 22:57, schrieb Lee Magnusson:
Wilhelm,
Thank you, very helpful. Regarding aliases: Is there a way to get the alias to
show up in the channel/parameter list? Are there other ways in which the alias
is used, which I'm missing?
all attributes which come from the process are shown in the tree when
you hover over a Parameter/Channelname.
In newer Testmangerversions you have to activate "show long hints" for
this (right click in the tree). The alias which is defined in the
(simulink)model is part of this attributes.
My versions are etherlab: stable-1.3, testmanager, 3.5.12
Regarding parameters, I now better understand how to store block parameters to
file, which should be fine for my needs. It also would be great if I could save
model parameters, and I'm wondering if that's possible. For example, I might
define a simulink parameter using model explorer in either the model or matlab
workspace. I can then use that parameter in a variety of blocks.
If you want do distribute Parameters to blocks in the whole model you
can place a "constblock" connected to a "goto" somewhere on an higher
level in your model and use
"from" blocks where you want to use this "const"block parameter.
Regards Wilhelm.
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
