can you insert ec_generic ? On Fri, Mar 8, 2013 at 12:01 AM, Mike O'Connor <[email protected]> wrote:
> Hi Matt > > That's what I though also, but the modules seem ok. > > > root@PITest:~# modinfo iptable_nat > filename: > /lib/modules/3.2.27+/kernel/net/ipv4/netfilter/iptable_nat.ko > alias: ip_nat > license: GPL > srcversion: 3A3DD184C3F85CF4FFF9C46 > depends: x_tables,ip_tables,nf_conntrack_ipv4,nf_nat,nf_conntrack > intree: Y > vermagic: 3.2.27+ preempt mod_unload modversions ARMv6 > > > root@PITest:~# modinfo ec_master > filename: /lib/modules/3.2.27+/ethercat/master/ec_master.ko > version: devel af21f0bdc7c9 > license: GPL > description: EtherCAT master driver module > author: Florian Pose <[email protected]> > srcversion: 34E5E37DB8FEB442D2FC537 > depends: > vermagic: 3.2.27+ preempt mod_unload modversions ARMv6 > parm: main_devices:MAC addresses of main devices (array of charp) > parm: backup_devices:MAC addresses of backup devices (array of > charp) > parm: debug_level:Debug level (uint) > > Mike > > On 8/03/13 1:59 AM, Matthieu Bec wrote: > > Hello Mike, > > > > This kind of message may show when your build and runtime versions > mismatch. > > Check vermagic from modinfo ec_master against uname -r ? > > > > Regards, > > Matthieu > > > > > > On 3/6/13 9:20 PM, Mike O'Connor wrote: > >> Hi All > >> > >> I have a very small program I want to control, which does not need a lot > >> of performance, I was hoping to use a Raspberry PI (wifi for uplink and > >> lan for ethercat) > >> > >> I've compiled everything and actual got very few warnings, but the > >> modules will not load. > >> > >> root@PITest:/opt/latproc/scripts# modprobe ec_master > >> main_devices=b8:27:eb:f8:43:f2 > >> ERROR: could not insert 'ec_master': Exec format error > >> root@PITest:/opt/latproc/scripts# > >> > >> I've check that they are in the correct format by running 'file' on them > >> and things like depmod do not complain. > >> > >> Building on the PI is hard because the source and headers are not > >> currently packaged so can not be installed via an apt command. And the > >> kernel is 3.2.27 which might also be a problem > >> > >> I've tried both 1.5.2 and HEAD from the online code. > >> > >> Any ideas on what I should look at next would be great. > >> > >> Mike > >> > >> > >> _______________________________________________ > >> etherlab-users mailing list > >> [email protected] > >> http://lists.etherlab.org/mailman/listinfo/etherlab-users > >> > > _______________________________________________ > etherlab-users mailing list > [email protected] > http://lists.etherlab.org/mailman/listinfo/etherlab-users > -- https://sites.google.com/site/ironspeedlinux/
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
