Quoth Cor Meijneke: > I ran into some trouble with e1000e driver (I think) while installing > the ethercat master.
I can't see anything in the trace you posted that suggests a driver issue. > [ 6259.203384] EtherCAT ERROR 0-1: Failed to set SAFEOP state, slave > refused state change (PREOP + ERROR). > [ 6259.223362] EtherCAT ERROR 0-1: AL status message 0x0035: "DC Invalid > Sync Cycle Time". This, however, fairly clearly indicates that your slave config is wrong. Make sure you're configuring the DC sync setup for that slave according to the vendor's guidelines. _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users