Never used them, but just had a quick look at the doco (just cos I was curious).
- It mentions the ability to Hot Connect any of the ports, but there's no
configuration behind this, just the usual hardware support.
- It is detected as three ESC's (as that's what it has internally), each one
being identified by a different RevisionNumber (but same product code)
- Primary ESC 1: ProductCode="#x04685432"
RevisionNo="#x00010000"
- Sub ESC 2: ProductCode="#x04685432" RevisionNo="#x00010001"
- Sub ESC 3: ProductCode="#x04685432" RevisionNo="#x00010002"
- It can be used as a distributed clock reference clock
- There's no PDO or CoE data / configuration
So I would expect you just need to set up three slaves as above, then the
master can report on the status of their ports (via reg information).
One thing to note is that TwinCat knows that the sub ESC's are sub devices but
I don't think the EtherLab master supports this, so you may need to place Sub
ESC 2 and Sub ESC 3 further down your list of slaves. (i.e. Sub ESC 2 after
the devices connected to port 3, and Sub ESC 3 after the devices connected to
port 5.) See page 12 for a diagram on how the ports relates to the the three
ESC's.
Regards,
Graeme.
-----Original Message-----
From: etherlab-users [mailto:[email protected]] On Behalf Of
Matthieu Bec
Sent: Wednesday, 19 April 2017 6:55 a.m.
To: [email protected]
Subject: [etherlab-users] experience with CU1128 | EtherCAT junction
Hi,
Has anyone had experience using a "CU1128 | EtherCAT junction" from Beckhoff
(*) with the etherlab master?
It seemingly looks like a dumb device, but the documentation hints at
particular steps to set it up with TwinCAT:
```
Topological configuration
With the CU1128, special attention should be paid to the sequence of the
EtherCAT slaves. Since the CU1128 has 7 junction ports, drop lines connected to
ports must and can be clearly identified in practice. If incorrect information
is provided in the configuration (TwinCAT System Manager file *.tsm), the
system cannot start.
```
Regards,
Matthieu
(*)
https://download.beckhoff.com/download/document/io/infrastructure-components/cu1128en.pdf
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
