On 21 April 2018 16:45, quoth Philippe Leuba: > I noticed that when we activate the master it takes a time that is > proportional > to the number of slaves to switch them to OP state. > Is there any reason the master can not do it in parallel ?
You can try the unofficial patchset (https://sourceforge.net/u/uecasm/etherlab-patches/ci/default/tree/#readme). While it can't do it completely in parallel without consuming a lot of bandwidth and risking breaking the realtime cycle, one of the feature patches that this includes allows scanning and configuration to occur in parallel up to the configured bandwidth limits. With default settings this results in blocks of 16 slaves at a time being configured in parallel. _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users