Has anyone else noticed memory leaks when loading the ec_igb mod?
I'm running a 4.19.106 LTS release with RT 44 and Etherlabs 1.5.2 with
patch 20190904. I've tested every RT release as far back as 4.19.82 with
the same results. I have had days of running the master without issue
when used with ec_generic and ec_e1000e.
In this case, it appears to be the ec_igb driver.
I'll boot the kernel without any of the Etherlab modules and watch the
used memory in top while performing no other tasks. It'll stay quite
stable for as long as I run it. Then I'll add in the ec_master module
and other than a slight bump, it'll stay quite stable for as long as I
run it.
Then I'll add the ec_igb module and that's when the used mem will
continuously increase. Within 5 minutes I noticed an increase of 55320KiB.
I find it strange I've not heard other reports about this happening, but
would like to know if anyone else has thoughts on this.
Thanks,
--
_The contents of this email message and any attachments are intended solely
for the addressee(s). This message (including any attachments) may contain
confidential, proprietary, privileged and/or private information. The
information is intended to be for the use of the individual or entity
designated above. If you are not the intended recipient of this message,
please notify the sender immediately, and delete the message and any
attachments. _Any disclosure, reproduction, distribution or other use of
this message or any attachments by an individual or entity other than the
intended recipient is prohibited. __
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
