Actually the 3.06 is a 533FSB. The 3.0 is 800FSB. So, I'm actually running at 23x156. My RAM of course is capable of running tighter timings because it's running well below spec. I'll see about doing those benches at some point for you ;)
Mr O. --- Bob Miller <[EMAIL PROTECTED]> wrote: > Mr O wrote: > > > Anyone else overclock at all? > > I told you the story of my ASUS P4C box. I found that at the > stock > FSB speed, the RAM would run at 5-2-2-2 timings. At even a > single MHz > faster, it would fail randomly during boot until I increased > RAM > latency. > Hardware: > > ASUS P4P800 motherboard (Intel i865 "Springdale" chipset) > Pentium 4 2.4GHz (hyperthreaded, 800 MHz FSB) > ordinary Intel CPU cooler > Kingston PC3500 HyperX RAM, 4 x 512 Mb > various other bits > > > My machine is super stable at 3495Mhz but pushing it over > that > > causes programs to just die whenever they want. > > Very good! Is that 228 MHz FSB w/ 15+1/3 multiplier? I'd > love to see > an lmbench memory latency graph from your box at that speed. __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree _______________________________________________ EuG-LUG mailing list [EMAIL PROTECTED] http://mailman.efn.org/cgi-bin/listinfo/eug-lug