Sorry, just re-read your post.  If it has 2 leads, then hook them up to a
battery with jumper cables and see what happens.  Don't let it over-rev and
don't let it torque itself off a work-bench.

Let us know what happens...


On Thu, May 23, 2013 at 7:50 AM, B R <[email protected]> wrote:

> Not sure if it is a starter motor or a generator.  It is DC, pretty sure
> just series as it only has 2 leads.  Wanting to get opinions on whether
> this would carry a typical 300# scooter with 300# (2 of us) payload at
> 40-45mph minimum.
>
> Specs on motor plate say
> For V. sys - 24
> Volts - 27
> Amps - 90
> Duty - CONT
> RPM - 8000
>
> Appreciate opinions and what those are based upon.
>
> Thanks
> amadare
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/95a31282/attachment.htm
> >
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
>
>


-- 
Marcus Reddish

*North Valley Systems LLC*
Stevensville, Montana
406-360-8628
northvalleyev.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130524/ad1a9d7b/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to