Sent from my HTC

----- Reply message -----
From: [email protected]
To: <[email protected]>
Subject: EV Digest, Vol 7, Issue 31
Date: Fri, May 24, 2013 08:16




Send EV mailing list submissions to
        [email protected]

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.evdl.org/listinfo.cgi/ev-evdl.org
or, via email, send a message with subject or body 'help' to
        [email protected]

You can reach the person managing the list at
        [email protected]

When replying, please edit your Subject line so it is more specific
than "Re: Contents of EV digest..."


 Also, please be careful not to append the entire digest to your reply. Many 
mail systems do this by default. Trim or delete the digest text from the bottom 
of your message, and quote only the parts to which you're replying.



Today's Topics:

   1. Re: EVLN: Think Before You Plug In (Rick Beebe)
   2. e-volks upgrade.... (Zeke Yewdall)
   3. Re: EVLN: Think Before You Plug In (tomw)
   4. Re: e-volks upgrade.... (damon henry)
   5. Re: EVLN: Think Before You Plug In (Roland Wiench)
   6. Re: e-volks upgrade.... (Thos True)
   7. Re: e-volks upgrade.... (Lee Hart)
   8. Re: Free charge points for UK residents (Martin WINLOW)
   9. Re: e-volks upgrade.... (Cruisin)
  10. EV'ers in LA area for Let's Make a Deal? (Michael Kadie)
  11. Re: EV'ers in LA area for Let's Make a Deal? (Cor van de Water)
  12. Re: EV'ers in LA area for Let's Make a Deal? (Peri Hartman)


----------------------------------------------------------------------

Message: 1
Date: Thu, 23 May 2013 09:11:12 -0400
From: Rick Beebe <[email protected]>
To: Electric Vehicle Discussion List <[email protected]>
Subject: Re: [EVDL] EVLN: Think Before You Plug In
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8

On 05/23/2013 12:43 AM, Rush Dougherty wrote:
> Corbin wrote -
>> Not quite off the shelf, as you have to do it yourself, but very cool!
> Actually,
>> for $2k, you can buy one assembled.
>>
>> corbin
>
> Or for $675 plus shipping you can get the TucsonEV-SE already assembled from
> www.TucsonEV.com.

Corbin was talking about an actual in-car charger not an EVSE. That
said, $675 is a good price for an EVSE. I hope it does well for you!

--Rick



------------------------------

Message: 2
Date: Thu, 23 May 2013 07:45:56 -0600
From: Zeke Yewdall <[email protected]>
To: Electric Vehicle Discussion List <[email protected]>
Subject: [EVDL] e-volks upgrade....
Message-ID:
        <CAFpyUpVd=Ybd0hZqez1eLFAUmrx0jTQsCc=w-99RGHtv1=0...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

So... a client of mine got a converted VW bug with the wilderness EV kit --
the kit#2, so it's a 6.7" series DC, 450 amp alltrax, 72 volt system with
six 12 volt 100AH gel batteries, no DC-DC, very little instrumentation,
crude offboard transformer 10A charger.     Right now, the car can move
itself around the yard, and that's about it.  They said they did get it up
to about 40mph on the flat before it died though.   Only 20mph even on very
slight upgrades.

Here's what I'm thinking of for upgrades....  they want a good solid
50miles range, and enough speed to keep up in city traffic (45mph, a few
small hills, but not climbing big ones).

Figure out if any of the current batteries are any good.... (some are brand
new, so they should be).

Better charger (not sure the old one is working at all, which could explain
why the main bank is not doing well).

Think about lithium batteries/smart charger/ and higher voltage

DC-DC converter

Is the Alltrax any good?   or should I think about a better controller?  It
looks tiny for a roadgoing EV, no heatsink even.  This one can't take
higher voltage anyway.

Lithium batteries?  Not sure that getting solid 50 miles on lead is
possible in this car without seriously overloading it.

Is the 6.7" series DC motor enough for this heavy of a car?

some sort of metering such as e-meter at least, aux battery voltage (it has
main battery volts and current, which I'm not sure are even working).  If I
go with lithium the BMS will probably have a good amount of monitoring
available.

The bug was completely restored, so even if I have to replaced every single
EV component, it was still a great deal for the price they got it for, just
for the donor car.

Also.... I got to test drive a ford focus EV yesterday -- just happened to
run into Ford's traveling EV/hybrid show while grabbing lunch at the
shopping mall.  It is a sweet car.  Being mainly a compliance car, it
seems, I wasn't expecting much, but I was pleasantly surprised.  It was
quick off the line, good regen (controlled by the brake pedal, not the gas
pedal), handled well, though it did feel a tad heavy for that small a car
(but I've driven new ICE cars that felt really heavy for their size too).
 Dizzying array of gauges and screens inside.  I like the concept of the
butterfly gauge.  If you drive more efficiently than average, you get
butterflies that fly around one of the display screens.  If you brake to
fast (less regen captured) or accelerate too fast, and drive less
efficiently than average, it takes butterflies away from you... kind of
neat  game to keep people from driving inefficiently.  I thought that was
interesting playing on people's emotions not to kill their butterflies
rather than giving them a cold efficiency number that most non-engineers
will just ignore.  The biggest thing I was surprised by was the trim level
and features were way nicer than my new prius -- though, for twice the
price, it better be.  Also had the C-max plug in hybrid (20 miles EV range)
which I didn't even know existed... didn't test drive that one.  They don't
have an EV certified dealership in Denver yet so you can't actually buy one
here, but soon, they said.  Much nicer car than the iMiev, for those who
can afford it.  I haven't driven the Leaf or Tesla S, so I can't compare to
that.

Z
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/4e278238/attachment.htm>


------------------------------

Message: 3
Date: Thu, 23 May 2013 06:50:21 -0700 (PDT)
From: tomw <[email protected]>
To: [email protected]
Subject: Re: [EVDL] EVLN: Think Before You Plug In
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii

"/But to install an affordable off-the-shelf 10K on-board charger, the
charger had better have the ability to draw only what is being supplied.
i.e.: plugging a 10K on-board charger into a typical 6kW public EVSE
will pop the breaker feeding 6kW EVSE (or the EVSE will shutdown/be
damaged). Meaning the on-board charger had better have some smarts to know
to turn itself down according to the capability of the source/."

It does have communication capability for J1772, but of course can't
communicate with a wall socket.  For that the driver has to have some
smarts.  When the charger is started up the software gives the opportunity
to input the charging power you want.  If plugged into a 120V socket the
software automatically limits the power.  Yes it is the EMW charger Corbin
referenced.

Sure it cost more for higher current level 2, but I would guess it is still
considerably less costly than installing a DC fast charger.  I would think
you only need the latter for longer trips along routes between cities,
somewhat like Tesla is locating their superchargers.




--
View this message in context: 
http://electric-vehicle-discussion-list.413529.n4.nabble.com/EVLN-Think-Before-You-Plug-In-tp4663123p4663159.html
Sent from the Electric Vehicle Discussion List mailing list archive at 
Nabble.com.


------------------------------

Message: 4
Date: Thu, 23 May 2013 14:22:29 +0000
From: damon henry <[email protected]>
To: EV List <[email protected]>
Subject: Re: [EVDL] e-volks upgrade....
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"

I don't think you have many good options here, short of starting over and doing 
it right, but here are some comments on some of the components you already have.
Your batteries are likely toast.  You can spend hours weeding through them and 
picking what seem to be good ones out and trying to replace the bad ones, but 
most peoples experience with lead acid battery packs proves that once part of 
the pack goes the rest usually follow, especially when it is an unknown pack 
which has been abused in unknown ways.

Yes, the 72 volt alltrax should have enough ooomph to drive in traffic and 
speeds up to 45 mph and up small inclines provided you still have a 
transmission in the car.  I started out with one of these in my 1970 Datsun 
truck and drove it in similar traffic.  The truck weighed about 2300 pounds at 
the time and I have the original 4 speed manual transmission.  Performance was 
modest, but did not feel dangerously slow.  It was fairly similar to the little 
4 banger that came in the truck.  I do have one large hill near my home with a 
couple of stop lights on it.  The second light is towards the top of the hill 
but rather steep and I did not like not being able to accelerate up to speed 
(35mph) before crowning the top of the hill although I have been behind many 
gas cars with the same problem.
I also use a 6.7 inch motor in my truck and it works just fine at all speeds, 
so your motor should be able to handle your modest requirements as well.  
However, both your motor and controller will need to be cooled.  You are 
working them hard, so you should have the controller on a proper heatsink with 
some airflow and you should be forcing air through your motor with an 
appropriate blower.  This is especially true if you are going to try to drive 
50 miles.  The longer the drive the more heat build up there is that needs to 
be dealt with.
Of course for these components to work out the car needs to remain lightweight, 
and there is no way you are going to get 50 miles range and remain lightweight 
with lead, so you are now talking about a few thousand dollars in lithium 
batteries. Once you have spent the money on the batteries it makes using this 
just adequate motor/controller combo kind of silly, which brings us back to my 
original assertion that your best option is to start over and do it right...  
larger motor, higher voltage/power controller and lithium batteries.
If you only needed 15 - 25 mile range then you could stick with lead acid 
batteries and the current components and get off fairly cheap.  I do not see 
how you can get 50 miles range with lead and the current controller/motor combo 
with anything but abysmal performance however.  The car would be too heavy and 
the drivetrain too underpowered.
damon
> Date: Thu, 23 May 2013 07:45:56 -0600
> From: [email protected]
> To: [email protected]
> Subject: [EVDL] e-volks upgrade....
>
> So... a client of mine got a converted VW bug with the wilderness EV kit --
> the kit#2, so it's a 6.7" series DC, 450 amp alltrax, 72 volt system with
> six 12 volt 100AH gel batteries, no DC-DC, very little instrumentation,
> crude offboard transformer 10A charger.     Right now, the car can move
> itself around the yard, and that's about it.  They said they did get it up
> to about 40mph on the flat before it died though.   Only 20mph even on very
> slight upgrades.
>
> Here's what I'm thinking of for upgrades....  they want a good solid
> 50miles range, and enough speed to keep up in city traffic (45mph, a few
> small hills, but not climbing big ones).
>
> Figure out if any of the current batteries are any good.... (some are brand
> new, so they should be).
>
> Better charger (not sure the old one is working at all, which could explain
> why the main bank is not doing well).
>
> Think about lithium batteries/smart charger/ and higher voltage
>
> DC-DC converter
>
> Is the Alltrax any good?   or should I think about a better controller?  It
> looks tiny for a roadgoing EV, no heatsink even.  This one can't take
> higher voltage anyway.
>
> Lithium batteries?  Not sure that getting solid 50 miles on lead is
> possible in this car without seriously overloading it.
>
> Is the 6.7" series DC motor enough for this heavy of a car?
>
> some sort of metering such as e-meter at least, aux battery voltage (it has
> main battery volts and current, which I'm not sure are even working).  If I
> go with lithium the BMS will probably have a good amount of monitoring
> available.
>
> The bug was completely restored, so even if I have to replaced every single
> EV component, it was still a great deal for the price they got it for, just
> for the donor car.
>
> Also.... I got to test drive a ford focus EV yesterday -- just happened to
> run into Ford's traveling EV/hybrid show while grabbing lunch at the
> shopping mall.  It is a sweet car.  Being mainly a compliance car, it
> seems, I wasn't expecting much, but I was pleasantly surprised.  It was
> quick off the line, good regen (controlled by the brake pedal, not the gas
> pedal), handled well, though it did feel a tad heavy for that small a car
> (but I've driven new ICE cars that felt really heavy for their size too).
>  Dizzying array of gauges and screens inside.  I like the concept of the
> butterfly gauge.  If you drive more efficiently than average, you get
> butterflies that fly around one of the display screens.  If you brake to
> fast (less regen captured) or accelerate too fast, and drive less
> efficiently than average, it takes butterflies away from you... kind of
> neat  game to keep people from driving inefficiently.  I thought that was
> interesting playing on people's emotions not to kill their butterflies
> rather than giving them a cold efficiency number that most non-engineers
> will just ignore.  The biggest thing I was surprised by was the trim level
> and features were way nicer than my new prius -- though, for twice the
> price, it better be.  Also had the C-max plug in hybrid (20 miles EV range)
> which I didn't even know existed... didn't test drive that one.  They don't
> have an EV certified dealership in Denver yet so you can't actually buy one
> here, but soon, they said.  Much nicer car than the iMiev, for those who
> can afford it.  I haven't driven the Leaf or Tesla S, so I can't compare to
> that.
>
> Z
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/4e278238/attachment.htm>
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA 
> (http://groups.yahoo.com/group/NEDRA)
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/378dfe5d/attachment.htm>


------------------------------

Message: 5
Date: Thu, 23 May 2013 09:37:17 -0600
From: "Roland Wiench" <[email protected]>
To: "Electric Vehicle Discussion List" <[email protected]>
Subject: Re: [EVDL] EVLN: Think Before You Plug In
Message-ID: <[email protected]>
Content-Type: text/plain;       charset="iso-8859-1"

Very simple to control any charger current by using your fingers and a set
of display meters.

I am using a PFC charger that has a maximum AC input of 50 amps. You do not
use a standard thermal circuit breaker for 50 amps, but 125% over the actual
AC input which would be 62.5 amps. I use a magnetic trip breaker for 60
amps.

Before I turn on the charger, I turn on the AC input power to a contactor
Line terminals only.  This AC contactor is between the main input 50 amp 4
wire plug and charger and a onboard chassis mounted 60 amp ground fault
circuit break and than to the onboard charger.  The AC display panel comes
on, showing 250 volts AC and 0 amperes AC and a 250 volts DC and DC amp
meter.

Next, I turn on the battery box explosive proof exhaust fan to purge any
battery vapors they may be.  This fan must first come on first, because it
has a interlock control circuit to turn on the AC input contactor.

I then make sure that the current control of the charger is turn all the way
down to 0 amps before I turn on the charger.  Turning on the charger, I then
raise the current watching the AC and DC amperes.  It does not matter what
AC voltage I am using, it can be any voltage from 90 to 250 VAC.

To know what the maximum current should be, this depends on the current
rating of the device you are plugging into.  For example if you are
connecting to a standard 20 amp 125 volt 3-wire receptacle, then the maximum
current you should draw from that receptacle is 80% or 16 amps.  On a 15 amp
125 volt 3-wire receptacle it should be 12 amperes.

The maximum length feeder wire between the receptacle and circuit breaker
panel on a 15 amp rated receptacle is about 50 feet for a No 12 Awg copper
wire.  Over 50 feet, use a No. 10 AWG copper wire for the first 50 feet, and
then you can drop down to a No. 12 AWG for the next 50 feet.

If you use a heavy duty industrial grade receptacle on a magnetic circuit
breaker, than you can go up to 18 amps for a No. 12 AWG copper wire on a 20
amp breaker on a feeder wire not more than 20 feet to the circuit breaker
panel.

Roland


----- Original Message -----
From: "tomw" <[email protected]>
To: <[email protected]>
Sent: Thursday, May 23, 2013 7:50 AM
Subject: Re: [EVDL] EVLN: Think Before You Plug In


> "/But to install an affordable off-the-shelf 10K on-board charger, the
> charger had better have the ability to draw only what is being supplied.
> i.e.: plugging a 10K on-board charger into a typical 6kW public EVSE
> will pop the breaker feeding 6kW EVSE (or the EVSE will shutdown/be
> damaged). Meaning the on-board charger had better have some smarts to know
> to turn itself down according to the capability of the source/."
>
> It does have communication capability for J1772, but of course can't
> communicate with a wall socket.  For that the driver has to have some
> smarts.  When the charger is started up the software gives the opportunity
> to input the charging power you want.  If plugged into a 120V socket the
> software automatically limits the power.  Yes it is the EMW charger Corbin
> referenced.
>
> Sure it cost more for higher current level 2, but I would guess it is
> still
> considerably less costly than installing a DC fast charger.  I would think
> you only need the latter for longer trips along routes between cities,
> somewhat like Tesla is locating their superchargers.
>
>
>
>
> --
> View this message in context:
> http://electric-vehicle-discussion-list.413529.n4.nabble.com/EVLN-Think-Before-You-Plug-In-tp4663123p4663159.html
> Sent from the Electric Vehicle Discussion List mailing list archive at
> Nabble.com.
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA
> (http://groups.yahoo.com/group/NEDRA)
>
>


------------------------------

Message: 6
Date: Thu, 23 May 2013 08:38:33 -0700
From: Thos True <[email protected]>
To: Electric Vehicle Discussion List <[email protected]>
Subject: Re: [EVDL] e-volks upgrade....
Message-ID:
        <cad_1+gb4h095wwvwyknqwnh+un+i+pmgnkrwkeadb8hhecs...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

I agree with Damon here. We had a customer with a super beetle who had the
6.7 with Alltrax and Hi-power brand lithiums. He had reasonable use from
this set up until one of the cells went bad. He found out that there was no
support here in the states for Hi-power. He opted to swap out the motor for
the HPEV Ac kit offered by EV Parts, and switched over to GBC lithiums from
Rick at Elite Power Solutions. Both systems come as kits with plug and play
features. Great manuals available as well as excellent tech support. He was
most happy with the end results.
-Tom


On Thu, May 23, 2013 at 7:22 AM, damon henry <[email protected]> wrote:

> I don't think you have many good options here, short of starting over and
> doing it right, but here are some comments on some of the components you
> already have.
> Your batteries are likely toast.  You can spend hours weeding through them
> and picking what seem to be good ones out and trying to replace the bad
> ones, but most peoples experience with lead acid battery packs proves that
> once part of the pack goes the rest usually follow, especially when it is
> an unknown pack which has been abused in unknown ways.
>
> Yes, the 72 volt alltrax should have enough ooomph to drive in traffic and
> speeds up to 45 mph and up small inclines provided you still have a
> transmission in the car.  I started out with one of these in my 1970 Datsun
> truck and drove it in similar traffic.  The truck weighed about 2300 pounds
> at the time and I have the original 4 speed manual transmission.
>  Performance was modest, but did not feel dangerously slow.  It was fairly
> similar to the little 4 banger that came in the truck.  I do have one large
> hill near my home with a couple of stop lights on it.  The second light is
> towards the top of the hill but rather steep and I did not like not being
> able to accelerate up to speed (35mph) before crowning the top of the hill
> although I have been behind many gas cars with the same problem.
> I also use a 6.7 inch motor in my truck and it works just fine at all
> speeds, so your motor should be able to handle your modest requirements as
> well.  However, both your motor and controller will need to be cooled.  You
> are working them hard, so you should have the controller on a proper
> heatsink with some airflow and you should be forcing air through your motor
> with an appropriate blower.  This is especially true if you are going to
> try to drive 50 miles.  The longer the drive the more heat build up there
> is that needs to be dealt with.
> Of course for these components to work out the car needs to remain
> lightweight, and there is no way you are going to get 50 miles range and
> remain lightweight with lead, so you are now talking about a few thousand
> dollars in lithium batteries. Once you have spent the money on the
> batteries it makes using this just adequate motor/controller combo kind of
> silly, which brings us back to my original assertion that your best option
> is to start over and do it right...  larger motor, higher voltage/power
> controller and lithium batteries.
> If you only needed 15 - 25 mile range then you could stick with lead acid
> batteries and the current components and get off fairly cheap.  I do not
> see how you can get 50 miles range with lead and the current
> controller/motor combo with anything but abysmal performance however.  The
> car would be too heavy and the drivetrain too underpowered.
> damon
> > Date: Thu, 23 May 2013 07:45:56 -0600
> > From: [email protected]
> > To: [email protected]
> > Subject: [EVDL] e-volks upgrade....
> >
> > So... a client of mine got a converted VW bug with the wilderness EV kit
> --
> > the kit#2, so it's a 6.7" series DC, 450 amp alltrax, 72 volt system with
> > six 12 volt 100AH gel batteries, no DC-DC, very little instrumentation,
> > crude offboard transformer 10A charger.     Right now, the car can move
> > itself around the yard, and that's about it.  They said they did get it
> up
> > to about 40mph on the flat before it died though.   Only 20mph even on
> very
> > slight upgrades.
> >
> > Here's what I'm thinking of for upgrades....  they want a good solid
> > 50miles range, and enough speed to keep up in city traffic (45mph, a few
> > small hills, but not climbing big ones).
> >
> > Figure out if any of the current batteries are any good.... (some are
> brand
> > new, so they should be).
> >
> > Better charger (not sure the old one is working at all, which could
> explain
> > why the main bank is not doing well).
> >
> > Think about lithium batteries/smart charger/ and higher voltage
> >
> > DC-DC converter
> >
> > Is the Alltrax any good?   or should I think about a better controller?
>  It
> > looks tiny for a roadgoing EV, no heatsink even.  This one can't take
> > higher voltage anyway.
> >
> > Lithium batteries?  Not sure that getting solid 50 miles on lead is
> > possible in this car without seriously overloading it.
> >
> > Is the 6.7" series DC motor enough for this heavy of a car?
> >
> > some sort of metering such as e-meter at least, aux battery voltage (it
> has
> > main battery volts and current, which I'm not sure are even working).
>  If I
> > go with lithium the BMS will probably have a good amount of monitoring
> > available.
> >
> > The bug was completely restored, so even if I have to replaced every
> single
> > EV component, it was still a great deal for the price they got it for,
> just
> > for the donor car.
> >
> > Also.... I got to test drive a ford focus EV yesterday -- just happened
> to
> > run into Ford's traveling EV/hybrid show while grabbing lunch at the
> > shopping mall.  It is a sweet car.  Being mainly a compliance car, it
> > seems, I wasn't expecting much, but I was pleasantly surprised.  It was
> > quick off the line, good regen (controlled by the brake pedal, not the
> gas
> > pedal), handled well, though it did feel a tad heavy for that small a car
> > (but I've driven new ICE cars that felt really heavy for their size too).
> >  Dizzying array of gauges and screens inside.  I like the concept of the
> > butterfly gauge.  If you drive more efficiently than average, you get
> > butterflies that fly around one of the display screens.  If you brake to
> > fast (less regen captured) or accelerate too fast, and drive less
> > efficiently than average, it takes butterflies away from you... kind of
> > neat  game to keep people from driving inefficiently.  I thought that was
> > interesting playing on people's emotions not to kill their butterflies
> > rather than giving them a cold efficiency number that most non-engineers
> > will just ignore.  The biggest thing I was surprised by was the trim
> level
> > and features were way nicer than my new prius -- though, for twice the
> > price, it better be.  Also had the C-max plug in hybrid (20 miles EV
> range)
> > which I didn't even know existed... didn't test drive that one.  They
> don't
> > have an EV certified dealership in Denver yet so you can't actually buy
> one
> > here, but soon, they said.  Much nicer car than the iMiev, for those who
> > can afford it.  I haven't driven the Leaf or Tesla S, so I can't compare
> to
> > that.
> >
> > Z
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/4e278238/attachment.htm
> >
> > _______________________________________________
> > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> > http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> > For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
> >
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/378dfe5d/attachment.htm
> >
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
>
>


--
Remember, it is not that the glass is half empty, in reality, the glass is
merely twice the size that it needs to be! -TNT'82
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/bfb57501/attachment.htm>


------------------------------

Message: 7
Date: Thu, 23 May 2013 10:52:07 -0500
From: Lee Hart <[email protected]>
To: Electric Vehicle Discussion List <[email protected]>
Subject: Re: [EVDL] e-volks upgrade....
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

On 5/23/2013 8:45 AM, Zeke Yewdall wrote:
> So... a client of mine got a converted VW bug with the wilderness EV kit --
> the kit#2, so it's a 6.7" series DC, 450 amp alltrax, 72 volt system with
> six 12 volt 100AH gel batteries, no DC-DC, very little instrumentation,
> crude offboard transformer 10A charger.     Right now, the car can move
> itself around the yard, and that's about it.  They said they did get it up
> to about 40mph on the flat before it died though.   Only 20mph even on very
> slight upgrades.

The Wilderness EV kit is pretty crude. Still, I would think its
performance should be better than you're describing. I had a ComutaVan
with a 72v system that weighed even more and had the aerodynamics of a
brick, and it would do 50 mph.

Look for the usual culprits. Soft tires, dragging brakes, poor
alignment. You should be able to easily push the car with one hand.

Get at least a voltmeter and ammeter in it for instrumentation. See what
the pack is sagging to, and how much current is being drawn from it. I'd
expect the pack to sag to around 60-65v at 250 amps. 60v x 250a = 15kw =
15hp (approximately), and 15hp will push a bug at 50 mph.

If the voltage sag is more, you may have bad batteries or wiring. If you
can't draw 250 amps, the Altrax controller may be programmed with too
low a current limit, or there may be bad wiring or connections to the
controller or motor.

> Here's what I'm thinking of for upgrades....  they want a good solid
> 50miles range, and enough speed to keep up in city traffic (45mph, a few
> small hills, but not climbing big ones).
>
> Figure out if any of the current batteries are any good.... (some are brand
> new, so they should be).

*Some*? If it's a mixed pack, the weakest link limits the performance of
the whole pack. One bad apple spoils the lot. Gels are not high current
batteries, and this low-voltage setup is likely to overstress them
unless the driver keeps the current down. Don't draw over 100 amps
continuous, or over 250 amps for more than a few seconds.

> Better charger (not sure the old one is working at all, which could explain
> why the main bank is not doing well).

That should be easy to ascertain with a meter. Gels do not like crude
chargers! They will quickly be murdered by a typical unregulated
charger! You *have* to limit the maximum charging voltage.

> Think about lithium batteries/smart charger/ and higher voltage

That could certainly work, but will cost a lot. Not only the batteries,
but also for a BMS, new charger, new motor and new controller as well.
Is your client prepared to put $10k into this vehicle?

> Is the Alltrax any good?

Alltrax are good controllers, though pretty small. They are intended for
small, light, low-speed vehicles.

> Lithium batteries?  Not sure that getting solid 50 miles on lead is
> possible in this car without seriously overloading it.

Sure it is. *Lots* of people have done it. But with lead, it's done with
lots of big golf cart batteries. Six 12v 100ah batteries is a pitifully
small pack, whether lead or lithium.

> Is the 6.7" series DC motor enough for this heavy of a car?

Possibly. Which 6.7" motor does it have? If it's an ADC, there is the
little A89 (10.39" long, 6.4hp), K91 (11.34" long, 10hp), and L91
(15.25" long, 15hp). The A89 would only be good for low speeds, like 40
mph or less. The GE motor in my ComutaVan was equivalent to the K91, and
was adequate for 50 mph. The L91 in my LeCar is more than adequate to do
70 mph.

--
Progress is the product of human agency. Things get better because we
make them better. Things go wrong when we get too comfortable, when we
fail to take risks or seize opportunities. -- Susan Rice
--
Lee A. Hart, http://www.sunrise-ev.com/LeesEVs.htm


------------------------------

Message: 8
Date: Thu, 23 May 2013 16:51:12 +0100
From: Martin WINLOW <[email protected]>
To: Electric Vehicle Discussion List <[email protected]>
Subject: Re: [EVDL] Free charge points for UK residents
Message-ID: <[email protected]>
Content-Type: text/plain; charset=iso-8859-1

I applied 09May and got a call Monday offering to fit the 16A version yesterday 
but explained I wanted the 30A one which they have booked to fit in 2 weeks 
time.  ?75 for the 30A one which I knew about already from their blurb.  It is 
the one with a tethered Menekes plug/cable suitable for the Renault Zoe but I 
already have a Vectrix conversion cable so I can use it with the V in the 
mean-time.

We'll see how they get on.

MW

On 8 May 2013, at 17:14, rustybkts wrote:

>
> I recently applied for and had installed a free chargepoint which included
> the flying lead and J1772 plug.
>
> Apparently, the UK government are underwriting these installations for home
> use.
>
> The 16A one is free and for an extra ?70 they install a 32A one.
>
> It is only for certain areas of the UK but you don't even require an EV to
> apply. Just say you have a friend who may use it.
>
> The site is www.polarnetwork.com
>
> I actually ran an armoured cable out to where I wanted the point installing
> as it was some distance from the supply point but they will do the whole
> installation if necessary.
>
> I am sure this will be of interest.



------------------------------

Message: 9
Date: Thu, 23 May 2013 10:11:53 -0700 (PDT)
From: Cruisin <[email protected]>
To: [email protected]
Subject: Re: [EVDL] e-volks upgrade....
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii

I think I would start over, if you want anything that you would be happy
with. You may want to consider this on ebay 181143604513




--
View this message in context: 
http://electric-vehicle-discussion-list.413529.n4.nabble.com/e-volks-upgrade-tp4663158p4663165.html
Sent from the Electric Vehicle Discussion List mailing list archive at 
Nabble.com.


------------------------------

Message: 10
Date: Thu, 23 May 2013 11:58:34 -0700
From: "Michael Kadie" <[email protected]>
To: "Electric Vehicle Discussion List" <[email protected]>
Subject: [EVDL] EV'ers in LA area for Let's Make a Deal?
Message-ID: <AD53F5DD021B4E9F86270DB95C860E85@KDShop>
Content-Type: text/plain; format=flowed; charset="UTF-8";
        reply-type=response

I got my filming schedule for an EV project I will be at Sony Studios May
30, June 3, and June 11-13. After I got my schedule I got a ticket for Let
Make a Deal June 14 1pm. Any EV'ers in LA area I join me
http://t.co/T4J0GDv76i

Also anyone know an affordable place to stay near Sony Studios?

Thanks,
Michael 'TRex' Kadie


------------------------------

Message: 11
Date: Thu, 23 May 2013 13:08:45 -0700
From: "Cor van de Water" <[email protected]>
To: "Electric Vehicle Discussion List" <[email protected]>
Subject: Re: [EVDL] EV'ers in LA area for Let's Make a Deal?
Message-ID:
        <a73bc4b8b3218642a56a2c9eb01b44e0014a0...@exchange.corp.proxim.com>
Content-Type: text/plain;       charset="us-ascii"

I believe the closest Motel 6 is near LAX, but I am sure there are other
options as well.

Cor van de Water
Chief Scientist
Proxim Wireless Corporation http://www.proxim.com
Email: [email protected] Private: http://www.cvandewater.info
Skype: cor_van_de_water Tel: +1 408 383 7626

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Michael Kadie
Sent: Thursday, May 23, 2013 11:59 AM
To: Electric Vehicle Discussion List
Subject: [EVDL] EV'ers in LA area for Let's Make a Deal?

I got my filming schedule for an EV project I will be at Sony Studios
May
30, June 3, and June 11-13. After I got my schedule I got a ticket for
Let
Make a Deal June 14 1pm. Any EV'ers in LA area I join me
http://t.co/T4J0GDv76i

Also anyone know an affordable place to stay near Sony Studios?

Thanks,
Michael 'TRex' Kadie
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)



------------------------------

Message: 12
Date: Thu, 23 May 2013 13:13:31 -0700
From: "Peri Hartman" <[email protected]>
To: "'Electric Vehicle Discussion List'" <[email protected]>
Subject: Re: [EVDL] EV'ers in LA area for Let's Make a Deal?
Message-ID: <F52E490ECA5340F8848AFD40648B94A8@perilaptop>
Content-Type: text/plain;       charset="us-ascii"

Try airbnb.com if you are willing to be a bit adaptive.
Peri

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Cor van de Water
Sent: 23 May, 2013 1:09 PM
To: Electric Vehicle Discussion List
Subject: Re: [EVDL] EV'ers in LA area for Let's Make a Deal?

I believe the closest Motel 6 is near LAX, but I am sure there are other
options as well.

Cor van de Water
Chief Scientist
Proxim Wireless Corporation http://www.proxim.com
Email: [email protected] Private: http://www.cvandewater.info
Skype: cor_van_de_water Tel: +1 408 383 7626

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Michael Kadie
Sent: Thursday, May 23, 2013 11:59 AM
To: Electric Vehicle Discussion List
Subject: [EVDL] EV'ers in LA area for Let's Make a Deal?

I got my filming schedule for an EV project I will be at Sony Studios
May
30, June 3, and June 11-13. After I got my schedule I got a ticket for
Let
Make a Deal June 14 1pm. Any EV'ers in LA area I join me
http://t.co/T4J0GDv76i

Also anyone know an affordable place to stay near Sony Studios?

Thanks,
Michael 'TRex' Kadie
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)

_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)





------------------------------

_______________________________________________
[email protected]
For general EVDL support, see http://evdl.org/help/
http://lists.evdl.org/listinfo.cgi/ev-evdl.org


End of EV Digest, Vol 7, Issue 31
*********************************
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to