Great job Wayne! Would love to see some pics of the project. Have seen a few of the smaller units that Randy does up at Canadian EV. -Tom
On Thu, May 30, 2013 at 8:35 AM, Electric Blue auto convertions < [email protected]> wrote: > I am about to finish up the air craft tug Im converting, hardest thing was > making an adaptor for the motor to the auto trans, I have to start with a > steel tubing of 18inx1inx6in, mill it to 4.75 in long, space 24 3/8 bolt > holes to connect to the trans bell housing, 12 on the front side, 12 on the > back side, mount a plate to the front and mount the 11 inch motor to that. > I made a coupler to mount the flex plate for the tq,converter . Since the > truck has 4 wheel steering and crab crawl, I had to make a belt drive for > the Hyd Pump. which also runs the brake system. > The good thing is Range is NOT an issue, but it will have to move 90,000 > lbs but at only 5 mph. There may be more to do. > I should have it done by next week > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/c9b9b3c2/attachment.htm > > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -- Remember, it is not that the glass is half empty, in reality, the glass is merely twice the size that it needs to be! -TNT'82 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/2df83fee/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
