Your controller board will need to be replaced. Peter Senkowski will do it; I think it's about 300 or so. I wouldn't be surprised if he also has leftover inductive throttles. On a personal note, I switched my throttle to get rid of a 1/2 power issue in 0-5 Celsius weather. It did solve that problem. Something about a heat-sensitive diode. So... You may want to consider that in your decision. Collegially,
If this message is short and is filled with typos, good bet it came from Bob's iPod On Mar 28, 2014, at 1:48 AM, J Bills <jbillsn...@flickfx.com> wrote: > Hi - I was able to score an old DCP Raptor 600 and want to replace my > Curtis squealer. Am I able to use a 0-5v potbox or resistive throttle with > a Raptor? I've only seen them used with inductive throttle setups, and I'm > not sure what the voltage was on those or the "curve" > > But I can't say I'm a big fan of the inductive with the springs and all. > Has anyone adapted a curtis fp-6 style pedal for use with an old Raptor? > > Failing that is there still somewhere that might sell an inductive sensor? > > Big thanks. > -J > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140328/22ff1a86/attachment.htm> > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA > (http://groups.yahoo.com/group/NEDRA) > _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
