Try connecting the radio to a separate battery isolated from the vehicle
Sent from AT&T Yahoo Mail for iPhone On Wednesday, October 13, 2021, 6:48 PM, nathan christiansn via EV <ev@lists.evdl.org> wrote: Hello Everyone, I have a Geo Metro that I converted electric and the radio has never been able to pick up more than one station because of all the noise the dc-dc converter outputs. I have been able to verify that the noise is being picked up through the 12 volt input of the radio and not through the antenna. I have tried putting a large line-voltage EMI filter on the output of the dc-dc converter and it did not do anything. I also tried putting a large capacitor on the output and experienced similar results. Is there anyone out there who has had a similar issue and found a solution? Any ideas would be appreciated. Nathan -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20211013/4079cbce/attachment.html> _______________________________________________ Address messages to ev@lists.evdl.org No other addresses in TO and CC fields UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub ARCHIVE: http://www.evdl.org/archive/ LIST INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20211014/686dc093/attachment.html> _______________________________________________ Address messages to ev@lists.evdl.org No other addresses in TO and CC fields UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub ARCHIVE: http://www.evdl.org/archive/ LIST INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org
