A while ago i had just the same as you, the only solution i found was to erase the last record that was sync on the palm and try again. I think that that record contains something that gpilod not can handle.
Op do 18-09-2003, om 06:41 schreef Bill Chmura: > Hello, > > I am having a problem with syncing my palm to Evolution. > > First off: I can access my palm via pilot-xfer or jPilot without any > problems. Just so you know that part should be okay. > > Okay - here is what happens. I start the sync and if I have it set to > handle my contacts it gets maybe 40 or so copied then gpilotd gives me a > segfault. > > The other problem I had was with the todo list. It just stopped. No > error, nothing. Eventually the palm gives up and claims a communication > loss. > > I've seen this asked alot, but could not find any answers. Its a USB > sync through a USB->serial convertor. Works fine with everything else. > In fact I had Evolution 1.2.2 before and could not get this far. The > upgrade to 1.4.4 at least lets it talk for the most part! > > Any help would be great! > > > > > _______________________________________________ > evolution maillist - [EMAIL PROTECTED] > http://lists.ximian.com/mailman/listinfo/evolution -- "Do you know what a Vulcan mind meld is?" -- Tuvok "It's that thing where you grab someone's head..." -- Crewman Suiter PGP Key: http://users.pandora.be/rivendell/marquetp.gpg Fingerprint = 2792 057F C445 9486 F932 3AEA D3A3 1B0C 1059 273B ICQ# 316932703 Registered Linux User #44550 http://counter.li.org
signature.asc
Description: Dit berichtdeel is digitaal ondertekend
