On Thu, 2004-09-16 at 14:22 -0400, Dan Winship wrote: > On Wed, 2004-09-15 at 17:04 -0400, Jeremey Wise wrote: > > How do I setup this debug status. Would I start evolution then run > > "/opt/gnome/libexec/evolution/1.4/evolution-exchange-storage > > E2K_DEBUG=4" at a shell prompt? > > The E2K_DEBUG=4 comes before the command, and you have to start > connector before starting evolution. So quit evo, run > > E2K_DEBUG=4 /opt/gnome/libexec/evolution/1.4/evolution-exchange-storage > > /tmp/exch.out > > (that's assuming you're using 1.4, and that evolution is installed > in /opt/gnome) > > then start evolution, do what you need to do to demonstrate the bug, and > send me the debug output. > > -- Dan Here is the info requested though it appears to me to contain no pertenant data. Maybe I am missing something. What I did was shutdown Evolution and run the suggested script above then in a seperate shell start evolution.
****************************************************************** **** STOP EVO AND RUN DEBUG STUFF SHELL: evolution-2.0 --force-shutdown Shutting down evolution-2.0 (Evolution Shell) Shutting down evolution-data-server-1.0 (Evolution Calendar file and webcal backend / Evolution Addressbook file and LDAP backend) Shutting down evolution-alarm-notify (Evolution Calendar alarm notification service) [EMAIL PROTECTED]:~> evolution-2.0 --force-shutdown Shutting down evolution-data-server-1.0 (Evolution Calendar file and webcal backend / Evolution Addressbook file and LDAP backend) Shutting down evolution-alarm-notify (Evolution Calendar alarm notification service) [EMAIL PROTECTED]:~> E2K_DEBUG=4 /opt/gnome/libexec/evolution/1.4/evolution- exchange-storage > /tmp/exch.out bash: /opt/gnome/libexec/evolution/1.4/evolution-exchange-storage: No such file or directory [EMAIL PROTECTED]:~> E2K_DEBUG=4 /opt/gnome/libexec/evolution/evolution- exchange-storage > /tmp/exch.out evolution evolution-data-server-1.0 [EMAIL PROTECTED]:~> E2K_DEBUG=4 /opt/gnome/libexec/evolution//evolution- exchange-storage > /tmp/exch.out 1.5 2.0 [EMAIL PROTECTED]:~> E2K_DEBUG=4 /opt/gnome/libexec/evolution/2.0/evolution- exchange-storage > /tmp/exch.out Evolution Exchange Storage up and running [EMAIL PROTECTED]:~> ***** START EVOLUTION TO RECEIVE EMAIL: [EMAIL PROTECTED]:~> evolution-2.0 asked to activate component_id `OAFIID: GNOME_Evolution_Addressbook_Component:2.0' asked to activate component_id `OAFIID: GNOME_Evolution_Addressbook_Component:2.0' camel_junk_plugin_check_junk em_junk_sa_check_junk pipe_to_sa spamassassin --version pipe_to_sa /bin/sh -c ps ax|grep -v grep|grep -E 'spamd.*(\-L|\-\- local)'|grep -E -v '\ \-p\ |\ \-\-port\ ' there's no system spamd with -L/--local parameter running test if spamd is running (port 7830) using spamc pipe_to_sa spamc -x -p 7830 use spamd 1 at port 7830 with spamc pipe_to_sa spamc -c -p 7830 junk filter => *JUNK* (evolution-2.0:12520): Bonobo-CRITICAL **: file bonobo-control-frame.c: line 720 (bonobo_control_frame_set_ui_container): assertion `frame- >priv->activated == FALSE' failed (evolution-2.0:12520): Bonobo-CRITICAL **: file bonobo-control-frame.c: line 720 (bonobo_control_frame_set_ui_container): assertion `frame- >priv->activated == FALSE' failed [EMAIL PROTECTED]:~> ************** -- Thanks, Jeremey Wise [EMAIL PROTECTED] All opinions or information expressed here are personal in nature and do not reflect the official position of Agilysys Inc. _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
