On Wed, 2002-11-20 at 11:13, Mark Gordon wrote: > On Wed, 2002-11-20 at 13:12, James Gallagher wrote: > > Hi, > > > > I have a visor which was syncing nicely with 1.08. It won't sync with > > 1.2. I've run gpilotd from the command line (in the past that helped me > > get it set up properly) and here's what I see: > > > > [jimg@zanzibar jimg]$ gpilotd > > gpilotd-Message: gnome-pilot 0.1.69 starting... > > gpilotd-Message: compiled for pilot-link version 0.11.5 > > gpilotd-Message: compiled with [VFS] [GOAD] [USB] [IrDA] > > [Network] > > gpilotd-Message: Activating CORBA server > > gpilotd-Message: Watching Cradle (/dev/pilot) > > gpilotd-Message: setting PILOTRATE=9600 > > HOME environment variable not set? > > > > Gtk-WARNING **: cannot open display: > > [jimg@zanzibar jimg]$ > > > > I have a stock Red Hat 7.3 system running on a Dell Inspiron 4100 laptop > > (P III) with Ximian Gnome. > > > > Any help would be greatly appreciated! > > > > James > > > > PS. I read on the list that slowing things down to 9600 would fix this > > but for me that produced no visible change. > > USB or serial? There was an earlier thread with a similar error using a > USB connection, and the resolution was to configure gnome-pilot to use a > "serial" connection.
USB. You say 'serial' in quotes; is there a trick so that I can still use the USB? Right now I have /dev/pilot linked to /dev/ttyUSB1. Again, thanks! James -- __________________________________________________________________________ James Gallagher The Distributed Oceanographic Data System [EMAIL PROTECTED] http://unidata.ucar.edu/packages/dods Voice: 775.337.8612 Fax: 775.337.2105 _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
