I attempted to run gpilot-control-applet --cap-id=1 and this was the result;
** ERROR **: Error initializing gpilotd capplet aborting... Aborted Have I done something terribly wrong? Todd > I have this working with evolution. rh 8.0 is rather messed up when it > comes to evolution. The documentation is quite out of date as there is > (afik) know control panel as in gnome 1.4. > > I found on a rh mailing list the following command: > > gpilotd-control-applet --cap-id=1 > > Ran it and a tool to enable conduits (including evolution) came up. > You also have to make sure gpilotd is running. It worked for me. > Of course, the sync for addressbook ignored all my category info! :-( > > Why this isn't on the faq, I don't know. :-) > > Ryan > > On Wed, 2002-11-27 at 21:33, Todd Long wrote: > > I've seen a lot of discussion about this, but have seen no definitive > > solutions. > > > > - pilot-xfer works fine with /dev/ttyUSB1 > > - On the Devices tab of Pilot Link, I've tried about every logical > > combination and still no communication with the Visor. > > - I've installed the evolution-pilot rpm, still nothing. > > > > Has anyone got this to work? > > > > > > Todd Long > > Jireh Consulting, Inc. > > > > > > _______________________________________________ > > evolution maillist - [EMAIL PROTECTED] > > http://lists.ximian.com/mailman/listinfo/evolution > > _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
