Try doing killev then running wombat from a terminal window, does it start up properly?
Chris On Fri, 2002-12-13 at 11:42, Jeff Boerio wrote: > I built Evolution 1.2 from source last night, installing in a non-standard > directory. Had been running Evolution 1.0.5 just fine. Was able to run > the 1.2 version last night without difficult. > > This morning, however, I needed to reboot my box, a Redhat 7.1 machine, > and can no longer get Evolution to come up. I get this in my xterm window: > > (Cannot access Bonobo/ConfigDatabase, not upgrading configuration.) > IDL:OAF/GeneralError:1.0 > > evolution-shell-WARNING **: Cannot access Bonobo/ConfigDatabase on wombat: >(IDL:OAF/GeneralError:1.0) > > and a dialog box that says "Cannot initialize the Ximian Evolution shell: >configuration database not found [OK]". > > I did some searching and found some suggestions, including "killev;oaf-slay" > which didn't help. I also removed the evolution directory and started > over, but that didn't help. Some have suggested libnspr4, but I don't > know that this would solve my problem since I was able to run Evolution > right up until I rebooted the box. > > Any suggestions? > > Thanks, > > - Jeff > > > _______________________________________________ > evolution maillist - [EMAIL PROTECTED] > http://lists.ximian.com/mailman/listinfo/evolution _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
