On Tue, 2003-01-21 at 14:50, Steven P. Auerbach wrote: > The next step is the crucial one, and confused me for quite a while: > click on "Send to pilot". This should set the ID on your clie, and > then everything should work. Be sure that you have the device settings > correct. This is done in the "Devices" tab of "Pilot Link". For my > Visor, the following settings worked: > Name: Cradle > Port: /dev/ttyUSB1 > Speed: 57600 > Timeout: 2 > Type: USB (this is different from some documentation I saw).
Since he's already sync'd the clie before, he should use "Get from Pilot" so that gnome-pilot will use the same pilot id as jpilot. TTFN, Lonnie Borntreger _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution