Tziporet,
Can you add the following as a known issue: "open-iscsi over TCP does not support usage of data digest on RedHat EL/AS 4 up3, up4 & up5." Note that this comment should be added to OFED release notes, not to iSER release notes. This is not an iSER bug (it's a bug in the backport for open-iscsi). Thanks, Erez Tziporet Koren wrote: > Hi All, > > OFED 1.2.c-11 is available now on the OFA server under: > _http://www.openfabrics.org/builds/connectx/release/_ > Note: This release supports FW 2.1.000 that is available on Mellanox > web site for download > and FW 2.2.0 that will be released soon > > Supported Platforms and Operating Systems > ========================================= > o CPU architectures: > - x86_64 > - x86 > - ppc64 > - ia64 > > o Linux Operating Systems: > - RedHat EL4 up3: 2.6.9-34.ELsmp > - RedHat EL4 up4: 2.6.9-42.ELsmp > - RedHat EL4 up5: 2.6.9-55.ELsmp > - RedHat EL5: 2.6.18-8.el5 > - SLES10: 2.6.16.21-0.8-smp > - kernel.org: 2.6.20.x and 2.6.22.x > - SLES10 SP1: 2.6.16.46-0.12-smp (partially tested) > > Main changes from OFED 1.2.c-10: > ================================ > - Merged all 1.2 branch patches to 1.2.c > - mad: Fix address handle leak in mad_rmpp > - mlx4 > - Added support for interrupt moderation for create cq to > support ipoib. > - Display the following device information via sysfs: > board_id, fw_ver, > hw_rev and hca_type. As a result ibstat presenting all entries. > - Fixed destroy special QPs. > - Fixed the work completion opcode for RDMA_READ operation > - opensm: > - Sets the time a packet can live in the Head of Queue of a > port that > drives a CA port to approximately 1 second. > - Number of dropped packets due to HOQ that will stall the CA > was increased > to 7 (instead of 1). > - IPoIB: > - Add interrupt moderation support for IPoIB UD > - NAPI is available using a module parameter > - Fixed a leak in ipoib_transport_dev_init > - Fixed kernel oops in IPoIB download > - New MVAPICH package (mvapich-0.9.9-1451): > - mpirun_rsh fixes: > * Check that we do not overflow command line size > * better handling for accept > - Fix for memory allocations whose size is bigger than 2^31-1 > - Fix for multiple communicator problem > - Fix for MPI_Finalize segmentation fault > - RDS: > - rds_poll() always returns POLLOUT. If you try to send and get > EWOULDBLOCK because the remote receiver is congested then > you don't get > to wait for POLLOUT to be raised before sending again -- > it's always > raised. This is worked around by implementing some kind of > exponential > back-off while retrying the send. This can be done by > increasing the > timeout given to poll(). At each poll() timeout expiry the > send is > tried again. > - Set max send and receive scatter/gather list size to 2 in > the QP attributes. > The second sge used for RDS header. > - Added rs_poll_flag to rds_socket structure to indicate the > back pressure > status and send space availability. > - Added MODULE_VERSION. > - ehca: > - Added support for RHEL4 up5 > > > Tested ULPs > =========== > The following ULPs are tested: > o OpenSM > o MPI (MVAPICH and Open MPI) > o IPoIB UD and CM > o SDP > o SRP > o iSER > o RDS > > ConnectX specific known issues and limitations > ============================================== > - The following features are not supported: > o Resize CQ > o APM > o SQD > - To load the driver on machines with 64KB default page size UAR bar > must be > enlarged. 64KB page size is the default of PPC with RHEL5 and > Itanium with > 64KB page size enabled. > Perform the following three steps: > 1. Add the following line in the firmware configuration (INI) file > under the > [HCA] section: > log2_uar_bar_megabytes = 5 > 2. Burn a modified firmware image with the changed INI file > 3. Reboot the system > > > Tziporet Koren > Software Director > Mellanox Technologies > mailto: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > Tel +972-4-9097200, ext 380 > > ------------------------------------------------------------------------ > > _______________________________________________ > ewg mailing list > ewg@lists.openfabrics.org > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg _______________________________________________ ewg mailing list ewg@lists.openfabrics.org http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg