Arlin Davis wrote:
I just noticed when setting up MSI support that ib_mthca fails with the 
following:

This is on 2 different Intel platforms that worked with OFED 1.2:

ib_mthca: Mellanox InfiniBand HCA driver v0.08 (February 14, 2006)
ib_mthca: Initializing 0000:0a:00.0
ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:0a:00.0 to 64
ib_mthca 0000:0a:00.0: NOP command failed to generate interrupt (IRQ 233), 
aborting.
ib_mthca 0000:0a:00.0: Try again with MSI/MSI-X disabled.
ib_mthca: probe of 0000:0a:00.0 failed with error -16

lspci -v v
0a:00.0 InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor 
compatibility mode) (rev

I just tried OFED 1.2.5 on the same HCA with MSI-X and its worked fine.
Which OS have you used?

Tziporet

My system info:

OS: Red Hat Enterprise Linux AS release 4 (Nahant Update 3) with kernel 2.6.9-34.ELsmp
> cat /proc/interrupts
50:        238        262       PCI-MSI-X  ib_mthca (comp)
58:          0          0       PCI-MSI-X  ib_mthca (async)
66:        339        764       PCI-MSI-X  ib_mthca (cmd)

> lspci -v
02:00.0 InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor compatibility mode) (rev a0) Subsystem: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor compatibility mode)
       Flags: bus master, fast devsel, latency 0, IRQ 209
       Memory at ca000000 (64-bit, non-prefetchable) [size=1M]
       Memory at ca800000 (64-bit, prefetchable) [size=8M]
       Memory at d0000000 (64-bit, prefetchable) [size=128M]
       Capabilities: [40] Power Management version 2
       Capabilities: [48] Vital Product Data
Capabilities: [90] Message Signalled Interrupts: 64bit+ Queue=0/5 Enable-
       Capabilities: [84] MSI-X: Enable+ Mask- TabSize=32
       Capabilities: [60] Express Endpoint IRQ 0






_______________________________________________
ewg mailing list
ewg@lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg

Reply via email to