On Thu, May 22, 2008 at 12:43 PM, Renaud Durand <[EMAIL PROTECTED]> wrote: > hello, > > I tried to run iscsi on my SLES10 sp1 computers, for this, i followed the > tutorials of OFED's wiki > (https://wiki.openfabrics.org/tiki-index.php?page=iSER and > https://wiki.openfabrics.org/tiki-index.php?page=ISER-target) > my problem is that : the target is working well (I can "discover" myself > either with 127.0.0.1, my ethernet address and my ib address) > > linux-target:~ # iscsiadm -m discovery -t sendtargets -p 127.0.0.1 > 161.74.X.X:3260,1 iqn.2001-04.com.example:storage.disk2.amiens.sys1.xyz > 127.0.0.1:3260,1 iqn.2001-04.com.example:storage.disk2.amiens.sys1.xyz > linux-target:~ # > > but the remote computer can't discover the target > > linux-cx5e:~ # iscsiadm -m discovery -t sendtargets -p 161.74.X.X > iscsiadm: connection to discovery address 161.74.X.X failed > iscsiadm: connection to discovery address 161.74.X.X failed > iscsiadm: connection to discovery address 161.74.X.X failed > iscsiadm: connection to discovery address 161.74.X.X failed > iscsiadm: connection to discovery address 161.74.X.X failed > iscsiadm: connection login retries (reopen_max) 5 exceeded > > but the ping works > linux-cx5e:~ # ping 161.74.X.X > PING 161.74.83.128 (161.74.X.X) 56(84) bytes of data. > 64 bytes from 161.74.X.X: icmp_seq=1 ttl=64 time=2.27 ms > 64 bytes from 161.74.X.X: icmp_seq=2 ttl=64 time=0.068 ms > > here is lsmod on my computer > > linux-cx5e:~ # lsmod | grep iscsi > iscsi_tcp 27520 0 > libiscsi 30208 1 iscsi_tcp > scsi_transport_iscsi 34320 3 iscsi_tcp,libiscsi > scsi_mod 156600 6 > iscsi_tcp,libiscsi,scsi_transport_iscsi,sg,libata,sd_mod > > > I really don't understand what the problem is, > if you have a suggestion/solution please tell me because I am desperate >
Please check the ACL in the target and verify that it includes the initiator IB address Run: tgtadm --lld iscsi --op show --mode target If it is not you should add your initiator to the ACL using: tgtadm --lld iscsi --mode target --op bind --tid=[id] --initiator-address=[src-ip] Also running iscsiadm -m discovery will create a node with tcp transport and not iser. If you want to use iser transport use iscsi_discovery script on the initiator. Eli. _______________________________________________ ewg mailing list ewg@lists.openfabrics.org http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg