Got it! Thanks!
# ibv_devinfo
hca_id: mlx4_0
transport: InfiniBand (0)
fw_ver: 2.9.1000
node_guid: 0002:c903:004c:e6e2
sys_image_guid: 0002:c903:004c:e6e5
vendor_id: 0x02c9
vendor_part_id: 26428
hw_ver: 0xB0
board_id: IBM0D80000009
phys_port_cnt: 2
port: 1
state: PORT_DOWN (1)
max_mtu: 2048 (4)
active_mtu: 2048 (4)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: InfiniBand
port: 2
state: PORT_DOWN (1)
max_mtu: 2048 (4)
active_mtu: 2048 (4)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: InfiniBand
On 3/20/2012 11:26 AM, Vladimir Sokolovsky wrote:
On 03/20/2012 05:43 PM, Daniel A. Vega wrote:
Hi Vladimir
Got farther by removing the .backports_applied file.
I'm getting this directory error however.
/bin/ls: cannot access
/lib/modules/3.0.13-0.27-default/build/include/*/kconfig.h: No such
file or directory
/bin/ls: cannot access
/lib/modules/3.0.13-0.27-default/build/include/*/kconfig.h: No such
file or directory
Hi Daniel,
You can ignore this error. It does not affect the compilation and I'll
fix it shortly.
Please remove "--with-cxgb4-mod" from the configure parameters in
order to pass the compilation.
cxgb4 is not supported yet.
Regards,
Vladimir
--
Daniel A. Vega
Dept. 7UEA/7T IBM LTC RDMA Fabrics Development
Ely, MN 55731
Phone: 218-235-0977
Email: dv...@linux.vnet.ibm.com
_______________________________________________
ewg mailing list
ewg@lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg