Hi Rosenstock, Thanks for responding.
As per our requirement we want to achieve IB bonding for HCA and Switch level fail-over. bond0 (Active- Passive) Please provide opensm configuration parameter [root@SRDCB0970RTGMS opensm]# ibstat CA 'qib0' CA type: InfiniPath_QLE7342 Number of ports: 2 Firmware version: Hardware version: 2 Node GUID: 0x00117500006f5f4c System image GUID: 0x00117500006f5f4c Port 1: State: Active Physical state: LinkUp Rate: 40 Base lid: 1 LMC: 0 SM lid: 1 Capability mask: 0x0761086a Port GUID: 0x00117500006f5f4c Link layer: InfiniBand Port 2: State: Down Physical state: Disabled Rate: 10 Base lid: 65535 LMC: 0 SM lid: 65535 Capability mask: 0x07610868 Port GUID: 0x00117500006f5f4d Link layer: InfiniBand CA 'qib1' CA type: InfiniPath_QLE7342 Number of ports: 2 Firmware version: Hardware version: 2 Node GUID: 0x00117500006f5f4a System image GUID: 0x00117500006f5f4c Port 1: State: Initializing Physical state: LinkUp Rate: 40 Base lid: 65535 LMC: 0 SM lid: 65535 Capability mask: 0x07610868 Port GUID: 0x00117500006f5f4a Link layer: InfiniBand Port 2: State: Down Physical state: Disabled Rate: 10 Base lid: 65535 LMC: 0 SM lid: 65535 Capability mask: 0x07610868 Port GUID: 0x00117500006f5f4b Link layer: InfiniBand [root@SRDCB0970RTGMS opensm]# [root@SRDCB0970RTGMS ~]# ibstat -p 0x00117500006f5f4c 0x00117500006f5f4d 0x00117500006f5f4a 0x00117500006f5f4b [root@SRDCB0970RTGMS ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR=192.168.1.1 NETMASK=255.255.255.0 BROADCAST=192.168.1.255 ONBOOT=yes BOOTPROTO=none USERCTL=no MTU=65520 BONDING_OPTS=" mode=1 primary=ib0 updelay=0 downdelay=0" [root@SRDCB0970RTGMS ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib* DEVICE=ib0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none TYPE=Infiniband PRIMARY=yes DEVICE=ib1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none TYPE=Infiniband DEVICE=ib2 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none TYPE=Infiniband DEVICE=ib3 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none TYPE=Infiniband [root@SRDCB0970RTGMS ~]# Thank You Atul Yadav On Tue, Feb 24, 2015 at 5:55 PM, Hal Rosenstock <h...@dev.mellanox.co.il> wrote: > On 2/24/2015 5:19 AM, Atul Yadav wrote: > > Hi Team, > > > > We are trying to setup the HCA and Switch level failover. > > > > Operating System:- Centos 6.5 > > > > Please guide us > > To run OpenSM on multiple ports/HCAs on the same machine for the same > subnet, multiple instances of OpenSM need to be invoked one per port/HCA > and need separate but similar configuration. > > -- Hal > > > > > Thank You > > > > Atul Yadav > > > > > > > > _______________________________________________ > > ewg mailing list > > ewg@lists.openfabrics.org > > http://lists.openfabrics.org/mailman/listinfo/ewg > >
_______________________________________________ ewg mailing list ewg@lists.openfabrics.org http://lists.openfabrics.org/mailman/listinfo/ewg