Hi,
OFED-4.8-2 is available at:
https://openfabrics.org/downloads/OFED/ofed-4.8-2/OFED-4.8-2.tgz

To get BUILD_ID run ofed_info

Please report any issues in bugzilla
http://bugs.openfabrics.org/bugzilla/ for OFED 4.8-2

Release notes:
https://openfabrics.org/downloads/OFED/release_notes/OFED_4.8-2-release_notes

OFED-4.8-2 Main Changes from OFED-4.8-1
-------------------------------------------------------------------------------
1. compat-rdma
- bnxt_re: Add speed defines for 50G and 100G adapters
- IB/core: Adding IB_SPEED_HDR definition
- bnxt_en: Adding device ids for BCM5880x devices
- bnxt_re: Avoid Hard lockup during error CQE processing
- BACKPORT qed: Enable RoCE parser searching on fp init
- BACKPORT qed: fix dump of context data
- qed: Backport Free RoCE ILT Memory on rmmod qedr
- bnxt_re: Fix incorrect DB offset calculation
- bnxt_re: Unconditionly fence non wire memory operations
- bnxt_re: Fix race conditions during load/unload testing
- bnxt_re: Fix memory leak if QP create fails
- bnxt_re: Disable atomics support
- bnxt_en: Fix Max MTU setting on SLES 12 SP3
- qede: SLE12SP3 Backport fix use core min max MTU check
- cxgb: SLE12SP3 Backport fix: use net core MTU range checking
- Remove vmw_pvrdma tech preview patches
- Fixed mlx4 backport
- qedr cherry pick: lower message verbosity
- Update qib backport for SLES 12.3
- bnxt_en: backport for RH 7.0 and 7.1
- compat-rdma.spec: Added compat-rdma-firmware subpackage
- bnxt_en: Backporting for RHEL 7.4 and SLES12SP3
- qedr: Add backports for RHEL 7.4 and SLES 12 SP3
- configure: Add parameters for RXE and RDMAVT
- ib_iser: Added support for SLES12 SP3
- mlx5: Added support for SLES12 SP3
- mlx4: Added support for SLES12 SP3
- ib_core: Added support for SLES12 SP3
- mlx5: Added RHEL7.4 support
- mlx4: Added RHEL7.4 support
- configure/makefile: Rename CONFIG_INFINIBAND_RXE -> CONFIG_RDMA_RXE to match 
upstream

2. Updated packages
- ofed-scripts:
  install.pl: Ignore firmware in compat-rdma-content. bug: 2677
  add --with-rdmavt-mod for qib
  Add VMware Paravirtual RDMA Driver as an installable driver
  Remove vmw_pvrdma tech preview install option
  install.pl: Added rdma-core-devel dependency for the perftest build
  Revert "install.pl: Enable bnxt_re on supported OSes only"
  install.pl: Added compat-rdma-firmware package
  install.pl: Enable bnxt_re on supported OSes only
  install.pl: Updated rdma-core dependencies
  install.pl: Remove requirement on the specific cmake version
  install.pl: Added support for SLES12 SP3
  install.pl: Added RHEL7.4 support
- rdma-core-v16.3
- fabtests-1.5.3
- libfabric-1.5.3
- perftest-4.1-0.2.g770623f

Regards,
Vladimir

_______________________________________________
ewg mailing list
ewg@lists.openfabrics.org
http://lists.openfabrics.org/mailman/listinfo/ewg

Reply via email to